COMMUNITY FORUM

harald

03:35PM | 11/21/99
Member Since: 11/20/99
2 lifetime posts
Bvelectrical
I have run a switch loop with 2 simple incandescent fixtures with a single pole switch at the end of the cable run (pwr. in----fixture----fixture----switch).

I cant get the thing to work. I used 2-wire cable. At first I ran the hot back from the switch through the fixture to the next fixture to neutral. Both lights were very dim and I realized my mistake.

I then ran another single wire between the two fixtures (making it a 3-wire segment)to use as the neutral from the first fixture, and then pigtailed the power from the switch to both the fixtures singularly. This didnt work at all. In fact, both fixtures were on dimly with the switch in the OFF position, and when the switch was on, only the second fixture back from the switch lit up.

Any ideas on what I am doing wrong? I would appreciate any advice, but especially any references where I could see a diagram of such a configuration.

Thanks,

John

BobF

02:18AM | 11/22/99
Member Since: 10/19/98
223 lifetime posts
First - if the light fixtures just have screws - pigtail a wire from the lights to the wires. Never put more than one wire under a screw!

Get a black marker or use black tape. Mark the color the ends of the white wire from the switch to the last fixture black. Do this so the next person to look will know that the white wire is HOT. Connect the blackened white to the switch and the light's black wire.

Connect the red (2nd hot wire) to this blackend white wire. This red is the hot lead for the first light.

Splice all black wires together.

Splice all non-blackened white wires together with the white leads from the lights. splice all grounds together.

The hot from the breaker goes straight to the switch. The blackened white sends power from switch to the second light. This power then goes to the other light via the red wire. The non-blackened white wires complete the loop back to the breaker.

harald

04:35PM | 11/22/99
Member Since: 11/20/99
2 lifetime posts
Thanks Bob.

Actually, though my post was not too clear, I have the circuit set up as you described. I have received some info from other boards that agrees with what you have said, and what I have done.

So, that leaves me searching for a short, faulty switch, damaged wire, or something just plain hooked up wrong that I am missing.

Ill recheck everything again. Thanks for the reply!

BobF

02:38AM | 11/23/99
Member Since: 10/19/98
223 lifetime posts
I prefer to hook my lights and outlets up in parallel, not series. If one goes bad, the others still function.
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

In many regions, the growing season has already begun to wind down, so it's time to figure out where you're going to store... It turns out that many bath and kitchen cleansers contain chemicals that are dangerous to the skin and eyes, and often pro... So often we paint tiny nooks white to make them appear larger, but opting for a dark, dramatic wall color like this one—Be... Chocolate-colored walls and large window frames allow the exposed wood beams to take center stage in this small screened p... If you're not crazy about the idea of commingling plants and pool, this modern variation may be more to your liking. The s... Yes, a freestanding garage can become its own tiny house. Artist Michelle de la Vega has all the comforts of a modern resi... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... Pursue what's known as the stack effect. To achieve it, open the windows on both the upper and lower floors, and as warm a... Like no other floor type, a checkerboard design works wonders to underscore the retro kitchen theme. Vinyl flooring, ceram... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... For the cost of a can of exterior paint , you can totally transform your porch. Paint the floor a hue that complements yo... In this urban apartment, a standard-issue patio became a serene and green perch by replacing the typical concrete with gro... If you put the washing machine in the mudroom, you can stop the kids from walking through the house in dirty, grass-staine...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2