04:59PM | 12/07/09
Member Since: 05/12/03
67 lifetime posts
I need to replace an in-wall 120V timer. To my suprise, the ones at the Big Box Stores all have four wires - red, white, black, and green (ground).

I have two wires coming out the wall to switch the light. Both black. The old timer also has two wires, not four. The house was built in 1983.

I could probably figure this out with enough looking through my old text books, but rather than risk blowing up the house I thought I would see if anyone knew how to do the wiring for sure.


Never buy a house built by an oil company...


01:54AM | 12/08/09
Member Since: 07/22/04
525 lifetime posts
"I could probably figure this out with enough looking through my old text books,"

didn't the new unit come with directions?

are there any other wires in that switch box that you could "tap" into ?

also are you trying to automatically control incandescent or flourescent lights.

answer these questions and somebody may be able to quide you on the best route to take.


03:25AM | 12/08/09
Member Since: 05/12/03
67 lifetime posts
I tried one timer - if I remember correctly it said to connect the white and black on the timer on one side, red to the other, green to ground. Since I had no ground, I just put a twist connector on the green wire.

When I did this, the timer just clicked on and off and so did the incandescent lights.

I switched house wires, same thing.


Never buy a house built by an oil company...

doug seibert

06:15AM | 12/08/09
Member Since: 08/10/02
843 lifetime posts
Quit tinkering!!.....Like Norm says.....Read, UNDERSTAND, and follow all the instructions........

If you only have TWO wire then you need a simple Spring Wound Timer....

You do NOT have the Neutral wire to support a powered/electronic timer....

You MAY have toasted the timer.....

"......measure Once.....cut Twice....

throw that one away and cut a new one...."


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.


type the code from the image


Post_new_button or Login_button

Pursue what's known as the stack effect. To achieve it, open the windows on both the upper and lower floors, and as warm a... Reused steel windows create an eye-catching splashguard in this walk-in shower. The vintage factory windows bring an inter... A galvanized steel tub is a surprising but charming fixture in this bright and breezy screened patio. It's perfect for was... If you're not crazy about the idea of commingling plants and pool, this modern variation may be more to your liking. The s... Yes, a freestanding garage can become its own tiny house. Artist Michelle de la Vega has all the comforts of a modern resi... If you lack plumbing skills but have a good sturdy tree, here's the easiest outdoor shower solution of all: Simply attach... Need a window and a door in a tight space? A Dutch door with a window may be your answer. These useful doors are split hor... How do you like this smart use for an old bottle? Clamp an empty wine bottle to a fence or wall near your outdoor deck or ... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... For the cost of a can of exterior paint , you can totally transform your porch. Paint the floor a hue that complements yo... Repurpose birthday hats to create a string of lanterns for your porch, patio, or garden. Cut the tip of the cone, punch h... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon