COMMUNITY FORUM

sgtpeeper

07:32AM | 06/15/03
Member Since: 06/02/03
14 lifetime posts
Bvbrush
Oh, what the previous owners of my house have let for me. I thought I was going to have a nice, simple interior repaint. Unfortunately, they repainted some of the trim with latex over oil, and obviously no primer. I started sanding and some of it started sheeting off. What's strikes me as odd though, is in some places the paint is sticking very well. I'm wondering if I can safely sand, prime, and paint over the latex paint that is sticking without the threat of it peeling later. It's been at least three years since it was painted. If it was going to peel, is it fairly reasonable to assume it would have done so by now? Of course, I'm removing all the peeling paint.

Thanks a lot for any help, and thanks to all who have answered my questions in the past.

MrPaint

07:33AM | 06/15/03
Member Since: 02/03/03
196 lifetime posts
sgt - best to take it all off - I know it is a pain - but it is really the best thing to do...

Mr. Paint

sgtpeeper

04:09PM | 06/18/03
Member Since: 06/02/03
14 lifetime posts
Well, I've been taking the paint off in various ways. Today I tried some Citristrip on a small piece of moulding. The latex bubbled up immediately, while the oil has stayed put for now. I'm wondering if I can use the Citristrip long enough to take off the latex, remove it, wash everything, and then safely prime/paint over the oil-based paint. Anyone know if the stripper will deteriorate the oil-based paint such that this is a bad idea?

Thanks!

5slb6

05:14PM | 06/18/03
Member Since: 07/28/02
1358 lifetime posts
I would scrape and sand off the loose paint and then remove the remaining paint with GOOF OFF which will remove just the latex and not harm the oil based paint.

retisin

07:04PM | 06/18/03
Member Since: 05/19/03
457 lifetime posts
If you decide to go the route with the stripping agent you are working with,even if it is left on to long,it'll just eat to the bare wood which may leave a high spot in your paint but I doubt it will even be noticeable.If this is working for you and your happy with doing it like this continue on.
Nothing is going to happen when you go to reprime and paint like you said you were going to clean up the trim before you do the next steps anyhow.

sgtpeeper

05:51AM | 06/19/03
Member Since: 06/02/03
14 lifetime posts
Thanks for the replies. I originally tried Goof Off, and it works great for cleaning up latex left over after scraping and sanding. But there's so much to scrape and sand, and there are some intricate areas that I don't want to gouge with a scraper, so I've been trying to find an easier way. I've removed a lot with my overpriced hair drier, aka heat gun (being careful not to use it in the presence of paint strippers or their fumes), but that starts getting a little scary when I have to get near drywall. Other than that, it's worked great. My piece of moulding I that I put Citristrip on has been sitting outside... that stuff has indeed gotten down to the oil-based paint, and all of the paint comes up quite nicely now.

That's my story. Hopefully this may help someone else later on. :-)

BTW, what would you do if someone painted latex over oil on drywall? Would you have to replace the drywall? Hopefully I won't be having this problem anytime.

Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

A simple banquette piled with pillows and lit from above with a wall sconce is a tempting spot to curl up with a favorite ... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1