COMMUNITY FORUM

doberman

07:44PM | 10/21/03
Member Since: 10/20/03
1 lifetime posts
Bvbrush
I recently bought a thiry year old house. I would like to fix the wall between the garage and the house. This wall is made of a half inch drywall product, but the surface is a fake wood grain paper (This is not wood paneling). It does not appear to be wall paper. If wet, some pieces of it can be torn off. The paper coating seems to be bonded to the wall very well.

The wall isn't in too bad of shape, but there are a few dings in it. There is book size hole I am patching with a piece of regular drywall.

I have searched and searched but cannot find any information on what this product is. I would like to fix the damage the wall has and paint it. Because of its surface, I'm not sure what to do exactly. I have been experimenting.

Does anyone know what this wall might be and how I can go about fixing it?

I have considered trying to skim coat the whole thing. Should I try to sand this with something coarse to roughen it up first? Or should I just fix the damaged spots and attempt to prime the whole wall and paint?


Lawrence

02:50PM | 10/24/03
Member Since: 11/14/00
333 lifetime posts
If it peels off when wet, then it probaly is just wallpaper. Use a solution of DiF--a product for stripping wallpaper that dissolves the wallpaper glue--that you can get at Home Despot or other home centers. Drywall paper does not just peel off unless you tear into it.

BV000377

07:36PM | 02/14/13
It isn't drywall. I was at a house in Hemet, CA that had the same exact product. It is hung to the framing but no joint compound was evident between the panels. My curiosity lays with whether or not the material could have asbestos!

BV000499

10:13AM | 03/05/13
1. I am a huge fan of your site! DIY forever! I live in a city and am relaly excited to see what you do in NYC! Congrats and best wishes on the upcoming move!2.I rent so contact paper has been a GODSEND. I have used a faux leather black contact paper to redo my entire kitchen! I've covered my counter-top (which was stained, burned, severely damaged) and I also covered my fridge so it would match my decor! A tip I've picked up for applying it is using either a bowl scrapper (if you are a baker) or a credit card, and for removal a hair dryer is handy in warming the glue for clean removal!

BV001231

11:38AM | 06/05/13
I have this and want to know if it is safe to remove. It has fauz wood grain and no joint compound. It has been nailed to wood furring stips. The urring strips are nial to solid block walls and can be easily removed with a pry bar.

BV003065

01:16PM | 01/19/14
I found the same drywall with a wood grain printed finish where I live, Long Island NY. The house is 1950's and there is painted wood paneling over this faux wood drywall. I have read that you can not use joint compound on this style of drywall. Supposedly it was a quick and easy way to renovate unfinished areas such as the garage. I don't believe it was made to be an interior finished wall. I put the paneling back in place for now. My concern is safety. If the product had a short life on the market there must be a reason, unless it was just because it was ugly. I can't imagine why anyone would use this inside the home. I am in a true 4 level split level which was purchased from the original owner. No disclosures were made at closing because the son claimed he didn't know anything whatsoever, his father had the house built and the seller grew up here.
I am not in a rush to disturb anything in this house even though it needs repairs. This latest discovery of wood grain printed drywall has me wondering about asbestos. We will need to upgrade the electric as we discovered it is not up to code. I desperately need the info on that drywall.

jcaption

09:08PM | 01/19/14
Member Since: 01/14/14
85 lifetime posts
If it was mine I would remove all the trim and go over the whole wall with 1/4 drywall.
Use Loc-Tite adhesive and you'll need less screws.
If you cut the drywall so it stays about 3/4 of the width of the casing back from the jambs the jambs will sit tight to the jamb.
http://www.loctiteproducts.com/p/12/4/pg_ca_all_p_clr/overview/Loctite-Power-Grab-All-Purpose-Clear-Construction-Adhesive-Cartridge.htm
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1