06:16AM | 08/09/03
Member Since: 08/08/03
2 lifetime posts
I have aluminum siding on my house. I am going to install blown in insulation. The way it was explained to me is that they remove on run from the alumimum siding and drill holes in the exterior wall. They then blow the insulation in from outside. The question i have is, how do you remove the aluminum siding? What are the steps?



05:25AM | 08/17/03
Can be removed without taking down the whole wall of siding. It is all locked together.


01:25PM | 08/17/03
Member Since: 08/08/03
2 lifetime posts
Ok, How do you disconnect each section?


03:43AM | 08/21/03
Sorry, typo.
I have been in the remodeling area for a majority of my life, and now I work with siding on a daily basis, and I am not aware of any way to remove a piece of aluminum from the middle of the wall without ruining it.
It can be done with vinyl, but not aluminum. You must remove the wall working from the top down.


06:06AM | 09/11/03
Member Since: 09/16/02
251 lifetime posts
Keep going tinman. How do you get the top run down? He's doing blown insulation. I would think when they say one run of siding they aren't talking the middle run. They're talking the top one or two rows. I would think they are only talking the side of the house that normally has gutters on it. The end with the peaks I would think you would do from inside the attic. If you did the siding method you would have to pull 5-15 runs away.



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.


type the code from the image


Post_new_button or Login_button

Deep blue grays like the shade shown in this example "have a nautical, serene feeling," says Amy Hendel, designer for Hend... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon