Two summers ago we painted the wooden framed storm door insert, and the front door into which it inserts.
We took the insert out, used flat, latex paint,and painted them separately.
We put them back together after the paint had been dry for two or three days. That obviously wasn't enough time for the paint to cure, and the insert is frozen into the door half-way across the bottom of the frame, and maybe 3/4 of the way up one side.
I've used a rubber mallat and putty knife to get through some of it, but am afraid I'll break the glass if I go at it too hard.
I've tried to free that dang-blasted insert in hot weather, high humidity, dry days, in the dead of winter (32 degrees below zero), and under every other condition I could think of, but can't crack the code.
Can someone please help me?
Thanks in advance!
- 15 Old House Features We Shouldn't Abandon
- 13 Lazy Cleaning Tricks for a Spotless Home
- Laundry Room Ideas to Knock Your Socks Off
- Insanely Easy 60-Minute Home Improvements
- 12 Sheds You Could Live (or Work) In
- Assembly Required: 15 DIY Kit Homes
- 7 House Sounds You Never Want to Ignore
- 10 Surprisingly Simple Woodworking Projects
- Worth It: 8 Renovations That Pay You Back
- Organize Your Life with 12 Dollar-Store Buys
- 9 Totally Amazing Mobile Home Makeovers
- Don't Make These 7 Mistakes in Small Spaces
- 20 Sneaky Storage Ideas
- 15 Totally Unexpected DIY Flooring Alternatives
- 7 Easy Budget-Friendly Backyard Makeovers
- 10 Closet Cures That Cost Less Than $100
- 11 Easy DIY Projects to Declutter Your Home
- 10 "Zero Dollar" Garden Hacks
- 10 Killproof Plants for a No-Effort Landscape
- 9 Insanely Easy 1-Hour Backyard Projects