I have just redone my kitcken cabinets in River Rock.
What do I use to clean any spots or spills? Water does not seem to work.
Thanks,
COMMUNITY FORUM
...about this, what prompted you to use RL River-Rock on Cabinets?!?!?
We sell a lot of RL paint where I work (NOT a big-box), and the RR is the LAST thing I'd use on cabinets!
If you actually did this, I would...
a) Sand it off, or
b) By some very high-quality dead-FLAT latex varnish, by McCloskey or Modern-Masters, and put on a couple coats of it.
The River-Rock is a cool finish on WALLS, but it's not cleanable. There's no sheen to seal out moisture.
Also, the roughness tends to trap dirt.
Sorry to tell the bad news!,
Faron
We sell a lot of RL paint where I work (NOT a big-box), and the RR is the LAST thing I'd use on cabinets!
If you actually did this, I would...
a) Sand it off, or
b) By some very high-quality dead-FLAT latex varnish, by McCloskey or Modern-Masters, and put on a couple coats of it.
The River-Rock is a cool finish on WALLS, but it's not cleanable. There's no sheen to seal out moisture.
Also, the roughness tends to trap dirt.
Sorry to tell the bad news!,
Faron
