06:39AM | 01/31/03
Member Since: 01/30/03
6 lifetime posts
Hi, I recently tiled my bathroom floor. I used a ceramic tile which looks like a natural sandstone. Anyway, it looked great until I grouted it. I have tried all of the heavey duty grout removers & have had no luck removing the grout haze from the service of the tiles. It made a great looking floor look horrible. I am at the point where I am considering ripped it all up & starting over. Does anyone have any suggestions? It would be hugely appreciated.
Take care


03:22AM | 02/12/03
Member Since: 02/10/03
2 lifetime posts
I had a similar problem in our house. One thing that took a lot of the haze off was to let it dry and then go over it with a Swiffer and take up that dust. If your tile doesn't have too flat of a finish it may help.


04:50AM | 02/12/03
Member Since: 03/13/00
1675 lifetime posts
I don't know if this is the best way but worth checking into. I had porcelain tile put on my screened porch and it is so hard that you literally cannot scratch the tile with a steel knife point. I've tried it on several leftover pieces. With that in mind, consider trying this:
1) Test yours to see if it's that tough.
2) LIGHTLY sand it with sandpaper or steel wool or some other abrasive that will cut the grout haze, but not the tile.


06:48AM | 02/12/03
Member Since: 01/26/03
542 lifetime posts
try moratic acid,available from your local home center


05:26AM | 02/13/03
Member Since: 03/13/00
1675 lifetime posts
...I think that's muratic acid.


07:39AM | 02/20/03
Member Since: 10/15/02
359 lifetime posts
Did you try the plastic scrubber to remove it yet?, also you didnt specify what type of grout you used, if its epoxy, chances are you will never get the haze off, once that stuff cures, its permanent.


01:54AM | 02/22/03
Member Since: 01/20/01
4 lifetime posts
If it is a cementitious grout haze use phosphoric or sulphamic acid diluted 10-1, wear safety equipment. Try to avoid using muriatic acid.

If it is an epoxy grout, use a product containing methylene chloride.Read instructions carefully and wear safety equipment.
Good luck
The Grout Dye Company


01:11PM | 03/07/07
Member Since: 03/06/07
2 lifetime posts
Funny how many of us are in the same pickle. Where does one find phosphoric or sulphamic acid, and just confirming neither is harmful to glazed ceramic tile? My guess is that a good stiff bristle brush wouldn't hurt, either...


02:20PM | 03/07/07
Member Since: 07/03/05
283 lifetime posts
It can be found in the tile section at HD


06:54PM | 03/08/07
Member Since: 03/06/07
2 lifetime posts
I'm having success with phosphoric acid and a brass bristle brush. It's slow going, but it's working. For my particular tile, the brush isn't damaging it.
Click_to_reply_button Inspiration_banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.



Post_new_button or Login_button

Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon