COMMUNITY FORUM

POMPS

04:07AM | 04/04/03
Member Since: 04/03/03
6 lifetime posts
Bvflooring
Hello, I need some help. I have ripped up the tile that covers my 3 1/4" hardwood fur floor as I am going to refinish it and now have a nasty black glue like substance on it. I am not sure that even the sander will take it off. Any ideas.
Thanks.

sungen99

04:48AM | 04/04/03
Member Since: 03/23/03
40 lifetime posts
Best thing to do is call in the pros. You would be surprised on just how much a ¾ hardwood floor can be sanded. It will look fine; just have the pros do it. Don’t make the mistake I did and try to scrape it off first because they will just come in and sand the cr*p out of it. Trust me on this one. If it has not been sanded a lot (and it sounds like you did not) it will be fine as the goop on top is only “skin” deep.

sebrun

05:16AM | 04/04/03
Member Since: 02/12/03
19 lifetime posts
Not sure this will help you, but we are in the midst of refinishing floors in our 1920 house and discovered a black, glue, tar paper-like substance. After trying numberous adhesive removers we tried (and please don't laugh) plain water. And it worked.

We just poured a bit of water over a small area (3 x 3) and placed newspaper over it. Let the paper sit for about 20 minutes and the adhesive comes right up with a plastic scraper.

POMPS

06:44AM | 04/04/03
Member Since: 04/03/03
6 lifetime posts
I am trying to save some money by doing it myself. I cannot believe the water tip!! It really works. It loosens up the glue on the black tar (which stinks up the house) but it comes right up. Thank you all.

Lawrence

10:42AM | 04/15/03
Member Since: 11/14/00
333 lifetime posts
Good thing the water worked. Also, a product called JASCO does an amazing job dissolving flooring adhesive. It is available in the flooring department at Home Despot. Very toxic, but it dissolves the adhesive like water on sugar or heat on butter.

willies all thumbs

01:21PM | 04/19/03
Member Since: 10/03/02
55 lifetime posts
sounds like the glue is an emulsion type.
water would'nt work on cutback. water will also work on linoleum paste which is brown color

er81iu

03:02PM | 04/25/03
Member Since: 04/05/02
2 lifetime posts
I had this same problem and used vinegar. However there are some small black stainns from the glue in the wood grain that I could not sand off. I tried bleach and it does not seem to come out. Should I just go ahead and stain it?
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp1