COMMUNITY FORUM

DanlWV

06:21AM | 05/07/04
Member Since: 05/06/04
11 lifetime posts
Bvflooring
I am considering moving into my cousin's old trailer but would like to take out the old carpeting and floors which are a little gross... i was considering using vinyl tile throughout the entire house (i'm not a big fan of carpeting anyway) but was surprised at how expensive the project could become... i found a very nice commercial grade tile (the type you'd see in hospitals or schools) at a really great price, but it isn't self-adhesive... i'm prepared to do the work, but i need to know if it is safe to use the adhesive on a pressed wood floor... what are your thoughts?

DanlWV

06:26AM | 05/07/04
Member Since: 05/06/04
11 lifetime posts
by pressed wood i'm referring to partice board... i'm not sure of all of the technical names for things, but the wood is the kind you'd find in those furniture kits that are laminated, not the kind of wood with large chips... please educate me on the proper terminology...

Floorcraft

10:02AM | 05/07/04
Member Since: 08/27/03
254 lifetime posts
install 1/4 plywood first.

tomh

12:25PM | 05/07/04
Member Since: 07/01/03
549 lifetime posts
There are several types of composite and fiberboard.

medium density fiberboard (MDF) is made of refined fibers and is often used in furniture and mouldings. It has an extremely smooth sanded surface. It is paintable if primed and is often veneered.

Particle board: looks like granules of wood the size of kitty litter all glued together and pressed. Very heavy, not structually strong. In furniture we call it explodoboard. Tends to be absorbant. See a lot of this as underlayment because its cheap, but it does not hold nails well and can't be used for hardwood floor. Mastics work better if not aqueous mix.

Oriented strand board OSB: wafters glued together. Used for sheathing, roofing and subfloor. Tends to be too rough for underlayment and does not hold glue well. Need to apply plywood or luan underlayment on this.

Hope this helps.

DanlWV

01:36PM | 05/07/04
Member Since: 05/06/04
11 lifetime posts
of the different types you listed, it sounds most like particle board - looks almost like large pieces of sawdust... so you're saying that i should be able to use a mastic on this and then apply the tiles???

tomh

02:45PM | 05/07/04
Member Since: 07/01/03
549 lifetime posts
Particle board accepts most mastics and adhesives well. Thin water or solvent based mastics can soak in and be ineffective. In the case of contact cement, just pre-coat the board, allow to dry, then put the adhesive coat on. Thicker mastics (ones applied with a trowel rather than a brush) do not have a problem. Adhesive on particle board can fail because the board is actually weaker than the adhesive, but for a tile floor, this is not a problem. Be sure surfaces are clean, use no water, pre-seal in the event the adhesive is thin.

DanlWV

05:51PM | 05/07/04
Member Since: 05/06/04
11 lifetime posts
after doing a bit more research online i'm seeing more and more people discouraging the use of vinyl tile on particle board... i'm getting nervous... i'm wondering how nice sheets of plywood would look if sanded, stained and treated... is that even a possiblity for flooring, or would it look horrible??? is it even possible to attach plywood (perhaps a luan or something) to particle board??? i'm afraid to make a move in any direction without knowing that there is an option that would work without a hitch... (p.s. i really hate carpetting)

Floorcraft

01:23PM | 05/08/04
Member Since: 08/27/03
254 lifetime posts
1/4 multiply would be best.

stain it! might look good!

some cork floors look like OSB!!

DanlWV

04:07PM | 05/08/04
Member Since: 05/06/04
11 lifetime posts
now you've got me thinking... i never thought of using OSB, but that could look really cool as a floor... you probably wouldn't be able to stain it, though, could you??? i think i remember hearing that OSB was treated to be waterproof... is that correct???

DanlWV

06:47AM | 05/10/04
Member Since: 05/06/04
11 lifetime posts
we're ripping up the carpet in the house today and i'll find out exactly what's under it (though i'm sure that it is particle board all the way through)... i've decided that i'm going with the vinyl tiles, so here are a couple of last minute questions:

which would you recomend? luan or plywood? ins and outs with each?

how do you apply the luan or ply to particle board? nails? screws? is there a pattern to follow?

if i find out that there is vinyl sheeting under the carpet (a real possibility with mobile homes) should i take it up or could i apply the luan/ply directly over it?

i'm getting excited!
Click_to_reply_button Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

Anonymous

Post_new_button or Login_button
Register

Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon