COMMUNITY FORUM

go4it2

10:17AM | 07/17/05
Member Since: 07/16/05
7 lifetime posts
Bvflooring
Is it ever acceptable to break the "start from the middle and work outward" rule in tile placement? When I do so, I am left with 2.125" strips on either end. I have two doors to the weather on each end of the room and I would prefer to have as much of a whole tile as possible, especially abutting the door leading to my deck which will be used most often. I am afraid that the small pieces will break over time. Also, there is an unavoidable 1/16" rise on the floor at each threshold due to the way that the doors were installed which will add to the breakage worry. (The tiles are 13" X 13".)

Tileguybob

11:27AM | 07/17/05
Member Since: 07/03/05
283 lifetime posts
Yes, you can deviate from the usual. In your case it may be a pretty easy as you could have the tile straddle the line rather than butt up to it. So instead of a 2" piece at each end you would have about an 8.5" piece at each end.

go4it2

12:20PM | 07/17/05
Member Since: 07/16/05
7 lifetime posts
Thanks for your speedy reply, but I don't quite understand what line I shoud straddle and how I would have 8.5" on each end. (It's hard without a diagram.) If I start in the center of the room doing a horizontal dry layout, equally spacing the tiles in both directions with a 3/16 spacer between each tile, I wind up with 2 1/8" inches left of bare floor on each end to cover with a piece of tile. (The room is 163" wide. The tiles are 13" X 13" each.) Instead of having these small strips that will be a pain to cut and be subject to cracking at the doors my thought was to start at one end with a full tile butting up against the threshold and going across the room as usual, winding up with approx. a 5" cut tile on the other end. (Much better than 2 1/8".) This goes against the rule that the end tiles should be the same size. Does it really matter if I do it that way?

Tileguybob

01:33PM | 07/17/05
Member Since: 07/03/05
283 lifetime posts
As you stated, if you start from the middle and work outward you are left with a 2" piece at each end. So instead of starting on that middle mark move it over 1/2 of a tile. Thus you would have the equivalent of a half piece and the original end cut.

Or you can start with a full at one wall, assuming the wall is straight and work to the opposite wall like you said. Depends on the eye appeal. I do it that way most of the time. There is no absolute right way, a lot has to do with the visual perspective and whether balance is essential. I personally find it to be more important on a wall where there is no furniture to take up space and block your view of the tile.

go4it2

03:03PM | 07/17/05
Member Since: 07/16/05
7 lifetime posts
Gotcha!! What a great idea!! Never thought of it. You actually dictate what dimension the end pieces will be by adjusting it in the center. I was so stuck on the center line being where you had to start that I had no idea what you were saying. Thanks soooo much! I can sleep tonight. Have a great evening.


Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

A sticky keyhole just needs a little lubricant. The problem is that WD-40, spray silicone, and other liquids attract more ... It turns out that many bath and kitchen cleansers contain chemicals that are dangerous to the skin and eyes, and often pro... So often we paint tiny nooks white to make them appear larger, but opting for a dark, dramatic wall color like this one—Be... Chocolate-colored walls and large window frames allow the exposed wood beams to take center stage in this small screened p... If you're not crazy about the idea of commingling plants and pool, this modern variation may be more to your liking. The s... Yes, a freestanding garage can become its own tiny house. Artist Michelle de la Vega has all the comforts of a modern resi... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... Pursue what's known as the stack effect. To achieve it, open the windows on both the upper and lower floors, and as warm a... Like no other floor type, a checkerboard design works wonders to underscore the retro kitchen theme. Vinyl flooring, ceram... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... For the cost of a can of exterior paint , you can totally transform your porch. Paint the floor a hue that complements yo... In this urban apartment, a standard-issue patio became a serene and green perch by replacing the typical concrete with gro... If you put the washing machine in the mudroom, you can stop the kids from walking through the house in dirty, grass-staine...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2