COMMUNITY FORUM

gmyachtsman

08:53AM | 08/30/06
Member Since: 08/29/06
1 lifetime posts
Bvflooring
I need to know if I should caulk the 1/4" expansion gap at the wall.

I'm re-tiling because all my tiles done last year right over the wood floor are coming up in the kitchen. This time I'm adding a layer of 3/4" plywood with backer board on top.

I've read that I need to leave a 1/8" gap between the boards and 1/4" at the wall. I can caulk (and tape) the area between the boards, but most websites say not to cault the 1/4" at the wall. My contractor says that will allow water in. Also there will be 3/4" plywood and then perhaps 1/2" backer board and then 1/4" tile, leaving a deep gap. We kind of compromised that he would caulk just the part where the tile is.

I'd am wondering whether that's the best approach. Should I put a baseboard around the edge of the tile (the contractor wasn't planning to)? Am I right in insisting the deep gap not be filled? It is OK to just caulk the top 1/4"?


Tileguybob

06:17PM | 08/30/06
Member Since: 07/03/05
283 lifetime posts
Fill the gap if it will be visible. If you put a base molding up, no need to fill it. The gap is required to allow movement of the wood in the walls. Caulk is pliable enough to allow that movement.

flooringworldDOTorg

10:46PM | 08/30/06
Member Since: 10/28/05
312 lifetime posts
make sure not to use acrylic/latex caulks.

Becasue they allow more movement before the bond breaks, I would only use a 100% silicone caulk/sealant such as you might find here:

http://obscurity.ws/floorsearch.php?query=silicone+caulk+sealant

_____________________________________________

There are two ways to do any job. The right way and the wrong way. Do it right everytime.

_____________________________________________

http://flooringworld.org/

_____________________________________________
Click_to_reply_button
Inspiration_banner

INSPIRATION GALLERY



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply_choose_button

captcha
type the code from the image

Anonymous

Post_new_button or Login_button
Register

Making this trio of storage totes is simpler than you might think. Gold screw bolts and spray adhesive hold the fabric cov... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Follow_banner_a
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon
 
webapp2