11:41AM | 07/30/07
Member Since: 07/29/07
1 lifetime posts
I have a travertine tile floor that was just recently set by a friend. While the floor is not terribly unlevel, it is enough that it bothers me, The tiles are not flush at the edges, is there anyway short of tearing the floor up to level the tile?

I mentioned to my friend and I am told that the floor slab was unlevel to start with. Not wishing to loose a frienship, I have not pushed the issue any further.


07:32PM | 08/02/07
Member Since: 07/03/05
283 lifetime posts
Your friend may be right, if the tiles were larger than 12", a flat floor is required. It has to come that way or be made flatter by using self leveling cements. Sometimes a larger notch trowel will fill in minor floor deviations, but nothing can compensate if the floor is really bad, other than a full mud job.

Nothing that you can do, a floor refinisher can sand it down but it takes experience and the right equipment.


12:42PM | 08/03/07
Member Since: 01/07/07
6 lifetime posts
You can remove the unlevel tiles and spread thicker or thinner mortar depending on the problem. Your friend should have leveled the floor before he starting sticking tiles. This is why you should ALWAYS go with a professional, insured installer. It may cost a little more, but as you have found out, you get what you pay for. I own a flooring store in Fort Collins, CO, if my customer has any problem like that, the installer is quickly sent back to fix the problem. With NO cost to the client.


07:49AM | 08/06/07
Member Since: 10/28/05
312 lifetime posts
no offense, but your friend doesnt know how to properly install tile.

while a flat subfloor/substrate certainly facillitates a quciker and easier instalaltion, it isnt a prerequisite to a good job !

Tile Craftsmen have been installing slab stone and tile for 100 or more years on wavy uneven substrates/subfloors WITH flush and flat as a sheet of glass finishes from tile to tile.

Regardless of a floors waviness or height intolerance, all an installer has to do is have a 2-foot masons level along, laying it on the tile as he is installing it. If the tile edges do not line up, you pull the tile and add or remove thinset until they ARE flush with all the surrounding tiles.

That is old school ceramic and stone installation 101.

You MIGHT be able to rectify some of it just by removing the worse ones and reinstalling.

I have my doubts though, becasue if you have alot of highs and lows, you have a rough time getting them all on the same level without redoing it all, but hey you might get lucky.

i feel your pain.

one of my best friends is a hobbiest basement refinisher. After tearing out all his work, it look good now :/ It sucked having to sneak all the materials in so he couldnt see me redo it.


There are two ways to do any job.

The right way and the wrong way.

Do it right everytime.




Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.


type the code from the image


Post_new_button or Login_button

Few projects are more fun than upcycling a vintage piece in a surprising way. Outfitted with a sink and a delicately tiled... Built on a rocky island in the Drina River, near the town of Bajina Basta, Serbia, this wooden house was cobbled together ... Large steel-framed windows flood the interior of this remodeled Michigan barn with daylight. The owners hired Northworks A... Edging formed with upside-down wine bottles is a refreshing change. Cleverly and artistically involving recycled materials... A Washington State couple called on BC&J Architects to transform their 400-square-foot boathouse into a hub for family bea... Similar to the elevated utensil concept, hanging your pots and pans from a ceiling-mounted rack keeps them nearby and easy... For windows, doors, and mirrors that could use a little definition, the Naples Etched Glass Border adds a decorative flora... The thyme growing between these stepping stones adds a heady fragrance to strolls along this lush, low-maintenance garden ... Decoupage is an easy way to add any paper design to your switch plate, whether it is wallpaper, scrapbook paper, book page... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Reluctant to throw away any of those unidentified keys in your junk drawer? Hang them from a few chains attached to a simp... A stripped-down model, sans screened porch, starts out at $79,000. Add the porch, a heated floor for the bath, and all the... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon