Installing the Skylight, Acrylic Block Panels, and Cooling System

Project: Elmwood Neighborhood, Episode 11, Part 2



The owner of the tenth Elmwood neighborhood project house, Brent Bachelder, wants to turn the home's attic into a recreation space.

Bob joins during the demolition process, before new LVLs and windows are installed. Next, a striking new acrylic bathroom wall goes up, followed by plumbing, HVAC work, and floor repair.

Finally, Bob learns about the new Surell countertops that are going in and concludes with a tour of the finished space.
Part 1: House Ten: Attic Conversion
Part 2: Installing the Skylight, Acrylic Block Panels, and Cooling System
Remodeling of the attic floor continues with the installation of Hy-Lite acrylic walls, an HVAC system, and insulation. On one side of the space is a recently installed skylight roof window.

Bob talks about a Hy-lite acrylic wall system that looks like glass brick. It will form a semicircle wall for the half-bath. Bob Small (from My Plumber) has installed the PVC and is handling the rest of the plumbing for the half-bath. The new vent connects to the old cast iron vent, which has been left in place.

The hydro air system that's been installed hangs from the rafters and operates quietly. For heat, it works in conjuction with the existing boiler. For cool air, a direct expansion coil will work in conjunction with an outdoor condenser.

The roof will be insulated with WR-30 fiberglass insulation from Owens Corning.
Part 3: Installing High-Gloss Laminate Cabinets and Surell Countertops
Part 4: Original Art and Contemporary Furnishings in the Finished Space
The theme of community building in the historic Elmwood neighborhood of Providence, RI, is the focus of this project. Rather than tackling one house, Bob Vila is helping 11 neighbors tackle smaller projects like porches, kitchens, bathrooms, and even a third-floor artist's studio.

Also from Elmwood Neighborhood


Inspiration_banner

INSPIRATION GALLERY

Partners' Latest
 
webapp1