You will need to wash with soap and water to make sure that it is clean. Then you will want to prime it with an exterior acrylic primer an dfinish ...
I don't see why that would not work but just be sure to get the exterior urethane though. I would think that at least 3 coats would be good.
You should go to a paint store to get the best advice and service as if you go to one of those big box stores you may not get that. You should use...
Some red colors take 5 to 6 coats to get even full coverage as the paint they are made out of is starts out clear to achieve those dark colors. You...
In most houses you see the trim and ceilings painted a white when a bold or dark color is used.
What you have is the wood delaminating and coming off with the paint. You will need to sand those areas to remove the flaking wood and paint. There...
I would sand the door with fine sandpaper and prime with an exterior oil based primer before you apply the acrylic latex finish paint.
First off I would not use vinyl siding as from what I have seen it is not the cure all that some are saying it is. I have seen it fading and chalki...
I don't think that there is a way to get the cabinets even without removing the finish and starting over. The sun has faded the stain in the areas ...
You can buy it at the paint store while you are getting your paint it is also called paint thinner.
I have heard that it is a little slower than just taping and skimming the joints, but the look is worth it to do the veneer. To paint it you wi...
You will want to wipe down the paneling with mineral spirits and follow that with a wash of amonia and water and if the finish on the paneling is r...
Which Zinsser primer did you use? It tells you on all the Zinsser products that you need to wipe down with mineral spirits and then wash with a...
From what I have read the stainless steel will be the best followed by double hot dipped galvanized. Also you can't coat the new wood with just ...
If your house looks worse now than before the painters got there I don't think that you are being unreasonable at all. But also if this an older ho...
I am not sure how sanding is going to bring back the texture to your siding. The sanding may get rid of some of the gouges and swirl marks but I th...