I have seen a lot of proffesional painters painting the trim first and then the walls when the trim is white and the walls are dark color as they s...
Yes you should use urethane as a finish on the cabinets as the linseed oil is not made for this type of use.Someone else can answer on the drawer p...
The primer will seal up a pourus surface and you need that if you are going from a flat to eggshell/satin as the primer will seal the surface bette...
It sounds as if they applied the paint to heavy as this can give you a cratered finish. It is cosmetic and does not hurt the durability of the pain...
I have found that with dark colors a 1/4 nap really give better coverage because it has fewer peaks and valleys, it is almost like spraying the pai...
Boy this is fun. I work for one of the largest paint manufactuers of paint in the USA, Duron.Yes we are good to our customers because that is all w...
Heck that sounds like it just may work. All you can do is spray some on a sample board and see if it works before you do your cabinets.
You do not need to prime the walls unless you are going from a flat finish to one with a sheen (such as eggshel/satin) as the color of your walls n...
Unless you wanted to take a belt sander to the walls it would be difficult to sand the stain out any other way.
I would go with fine steel wool dampened with mineral spirits and wiped off with rags, be sure to turn the rags and go to a clean one as they get d...
You could try wood bleach but with walls the size of yours it will be expensive, messy and time consuming. Some stains can be removed with paint re...
You may also want to look at getting a sparyer with a remote cup as with a cup gun you will not be able to tiltthe gun very much as the pick up tub...
Is the cedar smooth or rough? Is it just stained or does it have a finish over the stain? Answers to these questions will help in an answer.
Before you apply the Glidden Latex Semi-Gloss you had better find out how resistant to blocking it is as if it is not your doors and drawers will s...
The reason I suggested to use BIN was if it had been smoked in or was badly stained. The gripper product being latex is not going to be all that gr...
I am familiar with T-111 and as long as you stick with an all acrylic paint system it hold up very well. You will need to prime it with an exterior...
A good way to loosen up the mud and to make it dry harder is to add some flat latex paint and you add up to gallon to a 5 gallon bucket of mud.
The Wolman Compnay makes some very good cleaners but if it is really dirty and covered with mildew and mold a good cleaner is Jomax and the best wa...
I am sure you can repair the walls, but you may have to use durabond to repair large areas. If the person living in this apartment smoked or was th...
Sorry but yes you will have to still tape and mud your joints. You will need to thin the mud to do this and a good way is to add a gallon of flat l...