Fingernail polish remover will work on some types of glue as well.
bass615Member since 02/06/03
You can go to a sheet metal fabricating shop and have one custom made to fit. Get a thickness of metal comparible to your stovepipe or stove. Paint...
Pe-fab stuff usually comes with pre-drilled holes for mounting the doors, hardware, etc. They are not neccessarily pre-drilled in the right places,...
The only plausible reason to tear out a wall would be if the tub wouldn't fit through the doorway. Or perhaps to make more money. I'd get a smaller...
If you have a septic system you should check the vent that goes from your septic line through the roof. It should be a 4 inch pipe which vents gase...
Forgot to say you should tape the joints before applying compound to walls to avoid they're showing. Doesn't have to be pretty. Just to fill the cr...
I did my hallway in this manner and it turned out well. Use a trowel to apply a thin[less than 3/16th in., any thicker will possibly crack or fall ...
If someone wanted to build a house with no ceilings and exposed rafters, and a metal roof, how would the roof be vented properly and where and how ...