HKestenholz...please do not respond
brissette1Member since 12/29/03
HKestenholz...I did not post any bad ideas. I asked a question about replacing plywood with sheetmetal.Please read posts carefully before you pu...
HKestenholz.. I Thought I asked you politely not to reply to my questions.Your opinions do not matter to me.If you respect any of us at all then pl...
40 years too late H...As long as you do not purchase a system that uses a higher btu than you need for that space, air pollutants will not be a...
Andovers1, you have my sympathies.....Hkestenholz does nothing but guess and put down people.[Read my "heating problem" post] He is very p...
Im thinking of installing vent free gas firelogs into a existing fireplace in the living room.They produce 79000btu..and I have a gas line to co...
Chances are 1 in 3 I guess because it took 3 calls to different techs to finally find the cause....The 3rd tech actually only took 30 minutes to...
Filter maybe..I had a zone problem in my last apartment that had a dirty filter..Easy enough to check.Just take off the vent cover and the filter s...
The problem was that the access hole to the combustion chamber had screws that went thru the cover into the chamber..From what I was told,over...
I guess thats why 2 skilled techs[local heating company and the gas company]and 200.00 later the problem is still here.They never even checked the ...
ty kmerchant1..that sounds logical to me.Ill take it out and check see if the fan turns...happy new year
" That is the usual result of playing"YEAH BUT...."Make several suggestions,,,, don't respond to the suggestions .... tell of other problems ... ga...
uhmmm....any other ideas other than checcking the gas valve? put in new valve this morning ...no change
"It could be that the heat exchanger is broken and the fan blows the pilot out" If the fan never comes on, then how would the fan blow the pil...
gas supply stays conslant until the blower tries to turn on...Was told by another that this could be a venting problem....Does this seem correct???
opened windows and still have problem...pilot light remained lit [no draft present] and went off 30 seconds after gas came on..no blower motor still..
Because they think its the vent and they wont climb a 20 foot ladder under union rules. They replaced the thermocouple and the part with the flame ...
Hi , I have a *****50000 btu direct vent wall furnace model 867.736434. The pilot will light and the gas comes on.. The blower fan does not come ...