why they are called starving artists ""thinking about trying this myself, don't want to pay the big bucks from the artist..."" JMHO Carl
i would try using a heat gun to soften the linoleum and glu, then use a 3-4 inch wide putty knife in the tight places and a long handeled scraper...
NOTE NOTE ALWAYS UNPLUG THE MOTOR BEFORE MAKING ANY TESTS. what is the model number of the motor and of the saw?? sounds like the start cap...
either there is no vent for the drain, or it is clogged allosing water from upstair to syphon the water out of the drain. to verify syphoning acti...
why not buy a CAD program for house design to aid you in the remodel. you can lay out the rooms, change things around and see 3 d views of what yo...
this site shows details of the rods, maybe you can tell how to remount the rods from the illustrations: http://www.interiormall.com/cat/rods/re...
that is larger than the bathrooms in my first house. the master was 5x8, second was a powder room 4x5. now those were tiny JMHO Carl
if the tire came off, it indicates that it has reeached the end of ots useful life. your best bet is to get a new tire from the manufacturer of th...
if the cracks are in the paint only, sand the area, level with spackle and prime then paint. if the crack is in the drywall compound, you will nee...
some new construction only have the cleanout in between the house and sewer. they use a double wye so that the rota-rooter can be inserted in eith...
if you have a coke can, you can use it for the aluminum for the patch ( beer can will also work ) :o) JMHO Carl
what size belt do you need?? most standard sizes are available at the Depot. I had to go to sear$ to get a 4x21 for an old craftsman that I have. ...
Lonny, I did not intend to imply eliminating the cleanout, just using it as a point to tie in the new drain line. a new cleanout should be instal...
you will get a better joint if you use the mesh tape on a butt joint as if does not require as much material buildup as the paper tape. it is nece...
where I live, those two trees would cost about $300 each to remove using a licensed and insured tree removal service. If the trees were not as rea...
my favorite way to trim a bradford pear is with a chain saw, trimming 2 inches above the ground. I have had every bradford pear on my property spl...
check this site for details: http://www.benchnotes.com/Laying%20out%20an%20oval/laving_out_an_oval.htm JMHO Carl