Installing Laminate on Stairs
in answer to your questions. (1)your riser will need to be the same thickness as the laminate (so it will fit up to the stair nose).(2) yes use con...
in answer to your questions. (1)your riser will need to be the same thickness as the laminate (so it will fit up to the stair nose).(2) yes use con...
12
answers333
Viewsyou need a stairnose,what type will depend on the tile you choose,i think you should stop by your local home depot and look at the kinds of transit...
3
answers752
Viewsi looked around for a link that might help you,mannington ind. mgf's all types of flooring ,read how they rate there floors. http://www.floorsearc...
11
answers105
Viewsi assume you mean "acrylpro" ceramic tile mastic,and yes home depot sells it.however i would take one of the tiles with you and make sure it's the ...
3
answers656
Viewswell sal you got two answers,and my point of veiw is different than woodgirl,so try this take a quater and try to scratch a laminate,then try it on...
11
answers282
Viewsto measure for carpet on stairs,first start at the top step(were to carpet is to start) run your tape measure down to the bottom (were the carpet i...
2
answers797
Viewssounds like you have the situation well in hand,the only thing i can think to add is have someone confirm your understanding of what has happened.....
10
answers69
Viewssal ,flooring is about choices and compromise,if you want it to look real it needs to be real.pergo type laminates will not scratch as much as real...
11
answers620
Viewstalk to the best paint store in town,find out what is the best materials to use .practice on some scrap wood .then go for it.......good luck
2
answers795
Viewsyou will need the sq ft.of the area you plan to have done in hardwood,and what the contractor will charge for the upgrade. divide the cost by the s...
2
answers380
Viewsit depends on what kind of finish you have on the floors ,(1) some kind of urethane or (2) a wax floor, if its #1 try painting on some additional f...
7
answers649
Viewsthe best answer to to tear out the tile , fix the wall and put up new tile.good luck
2
answers88
Viewssorry i've never heard of that one,take the extra boards you saved when the job was installed and use them to make a repair.make sure your dishwash...
1
answers704
Viewspergo requires that the floor be level with in 1/8" over 10 feet. but a good installer should be able to fix the floor ,so you can install the prod...
10
answers146
Viewsyou can install on top of the laminate , just rough it up first,a backer board (cement type,like hardibacker) would be better. good luck
1
answers962
Viewsfirst thing ,do a moisture test.if thats ok then put down the 2 in 1 foam,then the laminate...good luck
1
answers171
Viewsi,m not sure i understand the question,but here go's...the 5/16 wood is to be qlued down? if so a lino under the wood won't hurt anything,but if c...
4
answers911
Viewsmost people will tell you a lighter color will make a room look larger,i'm not sure i agree.what i would do is make sure the room has good lighting...
4
answers691
Viewsif by flat head you mean like a roofing nail,then i think you should try to pull them,i doubt they will sand off.and i doubt you will be able to ...
2
answers327
Views