My last house I was in I had to build 3 corner shelves above my 51" wide screen TV for my components. The current house I'm in has aluminum studs i...
COPOMember since 02/18/99
He has to find where the frame is and using a steel plate he would mount the chain arm to the door.Mark
If it's a garage floor then after cleaning it you have to etch it with muratic acid, then paint with a roller.In the house just sweep, damp mop, th...
After cleaning the floor you have to etch the floor with muratic acid, or else the paint will peel. Mark
Here you go Jack. http://www.radixinc.com/tables/tables.html or a program: http://www.gravenhurst.net/ontario/free/picnic.htm MarkI can find it[Th...
Bookmark these babies. http://www.handymanusa.com/Articles.htm http://www.webontario.com/homeimprovements/new/homeimprove.html http://www.lowes.c...
There are 2 ways and I've used the 2nd.1. If your talking stuco then the best way is to spray it, but you need a compressor and spray gun. You can ...
Click below for your answer.... http://www.alby.com/consumer/foundation.html MarkToronto,Ont. Canada[This message has been edited by COPO (edited ...
Use the spray can paint remover in the Auto section of the store. Then remember to neutralize it with water and vinegar I believe or baking soda. I...
Sounds like when you removed the larger breaker which touches both bus bars to give you 120 + 120, now you are probably only getting 1/2 of 120 eve...