info on yardsale tool box I purchased
you might try this link http://www.craftsmancollection.com/
you might try this link http://www.craftsmancollection.com/
1
answers628
Viewsgo to http://www3.sears.com/ enter in model number select model go next page scroll down to wiring and it will show you the diagram
2
answers675
ViewsThe plumber should of ran the snake (was it the electric kind that has like a claw at the end or just the round skinny kind which will not do noth...
2
answers972
ViewsWe found mold (green kind) on the cement peer of our house. We got into the crawspace and with big sheets of plastic that the painters used and jus...
1
answers906
Viewshere is some informatin regarding installation in bathroom. So the final decision would be yours. http://www.warnercorp.com/installation.html
2
answers324
Viewswhat make and model is it?
5
answers942
ViewsSeems like your limited on what you can do my concern is with the drywall which is heavy there would be no support to hold the weight since you are...
1
answers548
Viewsthe edge moulding is the finishing touch which should be the responsiblity of the person installing your countertops. It is like hanging a pictur...
1
answers523
ViewsNot to be a smart alec but I would think a floor covering store in your area would have the pattern, or is it that he wants you to create the patt...
3
answers869
Viewsthis link may help www.freeplans.com
1
answers977
ViewsOkay I am thinking that you have the chute installed and you want to cover up where the chute comes through the ceiling. If so why not put some of ...
1
answers751
ViewsCarpet cleaner companies will offer you a scotch guard when they clean this will help also what ever you dont use runners that have rubber backing...
3
answers891
Viewsyou did not indicate which kilz primer you used there have it for for indoor and outdoor oil based and latex, just wondering also how long did you...
8
answers639
Viewsby your description it sounds like hardibacker board.
1
answers950
ViewsLook towards the bottom of this link gives a solution http://www.srfabrics.com/care/stain.htm
2
answers404
Viewsthis might help looks like a lot of work http://www.hometime.com/Howto/projects/drywall/drwl_8.htm
1
answers378
ViewsIt could just be the knob is stripped there should be a cover that is round you should be able to remove it and there should be a screw the star ki...
2
answers103
ViewsI dont think you should of used spray foam insulation on your doors most door installer do not use it, because of when it drys it does expand causi...
1
answers956
ViewsI am not sure sorry I have never used it maybe someone else will see this request and be able to help
13
answers342
Viewslink for care http://www.paintsource.net/pages/products/waterlox/waterlox_faq.htm
13
answers816
Views