FYI the control board had a hot spot and delamination, and a local company service tech replaced it. I read on the 'net this board was replaced by...
My 6 year old, Lennox GHR26 furnace decided to quit today. The thermostat appears to be working as I can hear it click to call the furnace to prov...
Ah, I think I see what you're saying. Similar to a sink drain which blocks the fumes.
Considering it's out of warranty, I don't imagine any part of the furnace is the responsibility of the manufacturer.A plastic nipple on the bottom ...
I have a 5 year old Lennox GHR26 gas forced air furnace, and it is leaking condensate. The furnace has a condensate trap on the side, and water is...
Yes, that's how it's set up now. The nuts that came with the tank/bowl kit were too large to fit in the holes in the bowl, so I had to substitute ...
I recently replaced some parts in my toilet prior to re-installing it after installing vinyl in the bathroom. I replaced the tank/bowl gasket, fla...
Point taken about the input wire being too small, but I can check on that. 2 others have quoted they paid around $1500 for this job, and IMO that'...
I have installed many GFCI outlets in my home in the 2 bathrooms and the kitchen, and I am having problems with the 2 in the bathrooms. In each ba...
Thanks for the reply. I have those books also. I'm a little apprehensive about doing the job, but it's a nice project, and I'll learn a bunch doi...
I got a MIG welder for x-mas that requires a 220V outlet, which I was going to install in my 100A elec panel in the garage. It turns out I really ...