They sell a tool for painters like a putty knife. You put the flat edge next to the edge and paint a straight line. Would that help you?
I agree with the post above, but I question the choice of red and black. Have you ever thought of going with maize and blue. It works well for th...
Can you take it to a hardware or home imp store and have them add tint just like theydo with paint. It might be worthwhile to check into.
Here are a couple responses I found on the web. http://www.duron.com/painters_edge/pe2001/3-Quarter/siding.html http://www.acehardware.com/info/we...
I'm trying to remember how my mirror attached in myold house. I think I had 90 degree angles holding mine in. You barely see them on the mirror...
Ereitom,I didn't read your problem very well. I have two ideas.1. Call Stanley and ask them if they have a solution.2. 00001, 00002, 00003 etc.S...
I thought all openers had a place to set the opener inside your garage and one on the pad. As long as the two are set on the same numbers it shoul...
Do you have enough funace and a/c to do this? You may also want to think about a cold air return duct for that room while you have it tore apart.
I know what you mean. If the humidity is very high outside then you may let in humid air, but if it cools to a nice temp it is good to let that ai...
I wouldn't add ridge vents until you are ready to reroof your house, but adding ridge vents would suck cool air in from the soffit vents and the na...
Well I don't understand why you can't go in until closing, but I will let you worry about the legal stuff. I would definitley talk to someone. Ma...
One way to fix it would be to replace it, but you would also have to re-mud and all that. Is there insulation that got wet also or is it uninsulated?
Did you try cleaning it up and then it came back or is it still there from what you're fininshing up?
What is a cold room? If it is already cold why does it need to be cooler? Just a joke. I still don't know what a cold room is.
I've always seen furring strips installed between the cinder block and drywall or panelling. This will give you room to drop any electrical or pho...
I don't know if you are asking the right people. This is just a bulletin board where anyone can come and ask general house questions. You may be b...
If you mean the drip edge you install it under. Flashing is usually on top of your roof around the chimney or next to a higher level. The drip ed...
I didn't think anaboveground pool had to be perfectly level. My uncle has one that has a little deeper end than the other side. (1 foot deeper) A...
Qwik Jon System sounds like what you are looking for. Here's a website. http://www.plumbingsupply.com/sewage.html Good luck.
The stuff my father-in-law has is very durable. He has had it for 10 years now and it hasn't scratched or chipped at all. He put pictures and mem...