People making u-turns in my driveway
Or post signs and scatter tire jacks/stop sticks.
Or post signs and scatter tire jacks/stop sticks.
10
answers122
ViewsIs the mold between the frame and the glass or the frame and the trim?
5
answers263
ViewsDoes the house have aluminum windows? Single or double pane glass?
5
answers50
ViewsThis has been on my small 2nd floor deck for 10 years, no problem. http://www.generalpaint.com/spantex.html
5
answers908
ViewsIf you don't know how to do it or own the equipment then find someone to do it.
4
answers822
ViewsGood Luck! You will have to get a diamond encrusted drill bit, if you cannot find one try a stained glass supplier.
2
answers674
ViewsAn oil stain will not work to achive the results you want. You need to find a source for a hot stain that is lacquer or toluene based, You best b...
3
answers498
ViewsSpray and back roll
3
answers728
ViewsIf the boots are installed properly they do not need to be caulked unless it is a metal roof.
7
answers86
ViewsPressure wash to clean, paint with quality latex.
3
answers47
ViewsYou could also try to find a stained glass shop with a diamond bandsaw or ring saw.
6
answers524
ViewsSo basically you want something that you can get done this weekend GOOD LUCK! (I suggest you go buy a tapestry or some fabric and hide it for your...
2
answers101
ViewsUse latex PVA primer, thats what it's for.
5
answers660
ViewsDON'T SAND PRESSURE TREATED LUMBER!!!!!!!!!!
5
answers963
ViewsWell first off don't use behr. I see that you didn't use a primer? That you didn't sand but only used a deglosser? Also you are cleaning with 40...
1
answers112
ViewsCouple of questions????How big of tiles? What kind? What is the radius of the hearth? If the tile is 6-8" and the hearth is not a tight radius yo...
6
answers426
ViewsYes, There are many other posts on this BB and the fix it for'em
1
answers167
ViewsThis is easy, You will need to rent a top nailer and an angle nailer, you may need to also rent a table saw, miter saw, etc. #1. Check direction of...
2
answers86
ViewsOH ****, didn't we just go thru this on the fixit for'em??????????????
4
answers528
Views