It was probably one of the structural panels systems or ICF construction techniques.
droglesbyMember since 05/19/01
I'd leave this to someone experienced. I know you want to save money but there is a time. If you have to DIY, then be warned that dryer and oven po...
Typically whole house fans are put into an existing hallway. If you know what you are doing you can use both walls as load bearing walls and cut th...
MrsD:I notice you live in Estacada. There are several testing labratories in the state of Oregon. Most will allow you to send test samples to their...
All pockets if installed properly have one of the head moldings detachable. This allows you to get into the pocket. If not you have to take off the...
There are many types and brands out on the market that it can be confusing. There are three types of wood flooring currently available. Laminates, ...
Just to add another problem to the mix but consider if the flooring is over 15-20 years old it may have asbestos in it as well. Be careful when doi...
If its non load bearing like you said, there is no need for a header. The only thing you want is to make it strong. Double or triple frame each sid...
There are many different types of engineered floor joist systems on the market today. Most of them will will span this distance with ease but not u...
I currently build and remodel using Polysteel ICF's. You can go to ICFWEB.com and get lots of information on ICF'. Tipically plumbing and electrica...