Some manufacturers also call it an end molding. Some installers may use carpet reducer, but you want something small.
If there is an existing vinyl you will go over, a floor patch will not do. You will need an embossing leveler. It dries harder.
As far as flooring, the asbestos is encapsulated in the vinyl or glue, the problems come from dry scraping or sanding. The fibers are shaped like a...
Best to cover them and forget about it as Carpetman said. It is only dangerous if scraped, or sanded dry. I would never recommend removal a DIY pro...
I didn't know about Europe taking their lights and toilets. That is wild!Carpetman: What do you think of Natural reflections glued directly to conc...
o.k. carpetman, I understand what you are saying about Bruce, but Didnt the Swedish invent the floating floors? They float ALL floating floors from...
Which engineered floor cannot be floated?I have yet to run into one.floorcraft.....most mgf refer to there floating floors as "long strip or floati...
I know there are some glues that will act as a moisture barrier if you glue down, But I would HIGHLY recommend floating it out after installing a m...
heres the scoop.Laminate is a very wise choice for steps cause you never have to worry about your steps again. But having said that, a wool carpet ...
Go for it, right to the drywall.Not sure if you need to change adhesive though, but I don't think I have EVER seen backerboard for trim.
Background is:New manufacturer who has been around about as long as 1/100th of the warranty, and will not be around much longer unless they are sel...
O.k. some good thought by all.Laminates still are a great floor for lots of people. I sell more laminate by two fold than any other product. Why? ...
If you seal now, it may set in the yellow. You may need to have grout removed and then have the grout redone, THEN seal it.
Be ready to replace or sand alot. If there is alot of moisture, it will raise the grain of the wood.Wood is not very practical in a FULL bath, just...
best to glue it all down. I am sure there is the option of perimeter, but I would check with the manufacturer, it depends on which product in the l...