definitely backerboard
Your dad's contact is right. By the book, the rule is an inch and a half of subfloor. The only thing is, no matter how thick u build it up, wood wi...
Your dad's contact is right. By the book, the rule is an inch and a half of subfloor. The only thing is, no matter how thick u build it up, wood wi...
2
answers688
ViewsDefinitely avoid pine....unless you love the dents and dings. lol. I would agree with the previous answer...laminate is by far the most durable. La...
2
answers983
ViewsObviously, you want to lay the floors according to the manufacturers specifications. Other than that, just make sure that you separate the floors i...
2
answers669
ViewsIf high humidity is an issue, why not a floating floor. And, no , not laminate if u'r set against it. Solid or engineered hardwood will both have i...
2
answers374
ViewsFirst of all, yes you could integrate them, but they wouldn't match....Pergo original had a different finish, and most patterns have changed, so yo...
2
answers277
ViewsYes, you can do it....actually, it's an ideal situation for floating floors. Far less complications than doing a glued down floor,as it's less affe...
1
answers85
ViewsAbsolutely do NOT install flooring before cabinets. Refrigerator, stove, etc. is fine. But, if you install cabinets , you WILL have problems, and i...
2
answers615
ViewsYou say the previous owner installed it. IF the floor has been in for more than 2-3 years, odds are it was not the snap-together floors that are pr...
2
answers54
ViewsWe can go into a whole book on what to do and where to start, but by far the easiest thing to do is to visit your local home store, **********, etc...
1
answers980
ViewsSetting time will vary from mortar to mortar, and depending on conditions. But, you can usually grout after tile sets overnight, officially, wait 2...
2
answers939
ViewsSorry to tell you, but you can do all the sanding and bleaching you want, but you probably won't do much for removing those dark spots. When moistu...
2
answers606
ViewsPeople! People! NO NO NO...please do not advise anyone to grout over the spacers unless the spacers are specifically designed to be left in. I can'...
7
answers46
ViewsAs long as the grout is in good condition (i.e. not powdery or flaking) there's no reason to remove any of the flooring. If you're only concern is ...
1
answers92
ViewsI know it's not what you want to hear, but I would never recommend trying to install 3/4 over particle board. You're asking for problems, and throw...
8
answers858
ViewsH.o.me D.e..pot has a Stain Remover made by Custom Building Products that is safe for natural stone. I've had pretty good success with it. Haven't ...
2
answers86
ViewsYes, the mortar will ruin the particle board. I absolutely will not install ceramic over a floor with particle board in the subfloor. Some people w...
2
answers277
ViewsYou definitely want to put a vapor barrier between the backerboard and studs. Just to let you know, u'r definitely doing the right thing using the ...
1
answers12
ViewsWhich flooring from Shaw are you looking at exactly?
4
answers817
ViewsCAULK, CAULK, CAULK! Without a doubt. Movement between walls and floors, or even walls and other walls, are going to be exaggerated in corners. Gro...
3
answers291
ViewsDon't think I've ever heard that suggestion, and don't know why you would think you need it. The backerboard is resistant to moisture. It will not ...
4
answers667
Views