The Tin Ceiling was produced by Abington Affiliates of NJ contact: Sheldon at (718)258-8333
homedocMember since 05/21/01
You can find information on Shoji screens at their website. http://www.bluefieldjoiners.com/ Or watch the feature again on ours in our Home Again s...
That was the Arch House built at the Rensselaer Polytechnic Institute under the direction of Prof. Walter Kroner, director of RPI's Center for Arch...
The type of sander and finish used in the Elmwood project is BonaKemi. Information on their products can be found at: http://www.bonakemi.com/
Flo-well made the tanks and did the install. However they were purchased by NDS (www.ndspro.com) and they no longer produce the plastic septic tank...
The Malibu project was completed in 1992. That product was FiberBond from Louisiana-Pacific. That division has since been purchased by US Gypsum an...
give us more details. Is this a recent problem? Has the environment the fridge is in change? ie have you decided to stop using your AC and it is...
The company is not Web enabled, They can be reached at 800 553 5309.The name of the company is Ahichini.
Bob has done a whole project, 13 shows, on remodeling a Se*rs kit home. He has also visited more during the course of shows during Home Again. ...
On our website their is a link to the manufacturer and a description of the fence. http://www.bobvila.com/BVTV/HomeAgain/Season12/MedfordProducts/B...
It was standard top grade 3/4" 4x8 sheets finished side up. She used regular oil based paint then sealer. The painted floors do not last as long a...
That's Amtico flooring. Bob also used Amtico flooring in his own home in Cambridge, MA in season 7 show 24, you can view that online on our site u...
I found one close at this link. http://www.catalog.kohler.com/onlinecatalog/detail.jsp?item=159502&prod_num=212-GD&module=Bathroom+Accessories&frm=...
hat's Amtico flooring. Bob also used Amtico flooring in his own home in Cambridge, MA in season 7 show 24, you can view that online on our site un...
Bob installed a small lift, the Windsor Elevator, from Access Industries into the Accessible Home project he did in Roxbury, MA. For more or you ca...
If I were going to do this I would use the pre-fab arches available at Outwater plastics, the people who make 'em at www.outwater.com see: http://...
This is the link to the manufacturer. They should be able to provide you with a distributor in your area. http://www.hy-lite.com/
Bass & Bass Salvage Yard (Flea Mart) at 230 Industrial Blvd., in (I believe) Naples -- zip code 33842. The phone number I have is 813-643-4424.
This is list of Manufacturers of this product. They should be able to locate a distributor in your area. http://www.epsmolders.org