Greetings,As I have posted in other answers, you need to be very carefull cutting the glass because it will be very brittle.You could look at antiq...
JasonPMember since 11/16/02
Greetings Brian,I would recomend that you look into a vinyl clad, wood casement, replacement windows, with a nail flange that will be made to fit t...
Greetings,Be very carefull removing the old glass, it will be very brittle!Good luck,Jason
Greetings tbone20tnt,Yes, most places require a electrcal permit.Sounds to me that you have not made a friend of this inspector!I would first, put ...
Greetings All,As some have mentioned, there are some circuts that are dedicated like the refer and furnace.If you go on a vacation and your power t...
Greetings,From what I am reading, your aluminum windows were probably installed with a nail fin first, then the bricks were installed.If that is th...
Greetings,For 5 Years!I would have a representative from the company that makes the windows come out and see if the windows are installed properly ...
Greetings Tired,As I understand it you have T & G siding that sounds to me that it is not flashed properly around the windows.I you have the 908 ca...
Greetings kcdoc,You can use almost anything for a shim.I think I would shim the door jam by loosening the screws at the jam, closest to the door, a...
Greetings All,When it comes to buying windows from a home improvement company, there is no need to spend more than 3 or 4 hundred dollars per windo...
Greetings MammaQueen,The big orange box is H.D.But, I still would not use the windows!Regards,Jason
Greetings,Please don't take this the wrong way but, short of using a door stop, you will driveyourself nuts.Good luck.Jason
Greetings,I live in New Hampshire and have been installing Harvey Windows for years.They have good windows and they stand behind them.Good luck,Jason
Greetings MammaQueen,Yes, there is a difference!Because buying the cheaper, wrong window is always more expensive that buying the right one the fir...
Greetings Snolts,It sounds like it could very well be an installation problem.The only way I know of to tell would be to remove the window stops on...
Greetings,You may want to check the sill at the bottom of the Pella door.You may need to adjust it for a tighter seal.Jay J. is right about the con...
Greetings,Listen to Jay J..You would have to buy a roll of coil stock and then use a brake to bend what you need.You would be better served by find...
Greetings,I just installed 12 Harvey Clasics in about 6 hours. (for pay)I happen to think the Home Depot brand windows are not that great. After l...