What are wallpaper tacks? All wallpaper I have seen is glued up.
Get Help from Bob Vila
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
You need about 29.4 cubic feet. That is a little over 1 yard. 1 yard =27 cubic feet.here is the calcarea of circle is Pi x r x r= 3.14x7.5x7.5 = 17...
You have a loose connection on the outlet where you saw the smoke. DO NOT use or reset this outlet until you have it checked and most likely replac...
If you do a search on google you will get many hits on homelite parts.Try any of your local small engine repair shops. They should have one or mayb...
It refers to the number of surfaces inside the socket. A nut has 6 surfaces. You can make wrenches with 12 or 6 surfaces to grip the nut
If these are threaded pipes the only tool is 2 pipe wrenches. If it is really stuck you could put a pipe on the handle of the wrench to get more le...
If this is an old piston pump I would not replace it if it is working. Mine is at least 50 years old and I would not change it for new jet pump. I ...
Toilets can use a very large amount of water. Check your meter when you have everything turned off. You should not see any motion of the dial. If t...
The problem is you should not use the miter gauge AND the fence at the same time. Wood can jam and be kicked by the blade. I usually don't remove t...
Sounds like you don't have the proper venting in place. The sump pump is sucking the water out of the toilet
If you can't find the part, try taking the pieces to a local welder. Perhaps it can be welded back together.
The pressure tank is normally beside the pump. It can go anywhere on the plumbing system however and still work properly.
Sounds like your foot valve may be leaking. Do you have a shut valve on the input of your pressure tank. AFter the tank pressurizes try turning it ...
Black wire goes to the brass screw. White wire goes to the silver. This is true for receptacles as well.[This message has been edited by joed (edit...
Try and start it. If it starts just add more gas as required and change the oil. You probably din't change the oil last year either. Sharpen the bl...
If All the cables come infrom the right ans you want to move to the right then it might not be a big deal. If any cable come infrom the left and yo...
The breaker must be rated to the smallest size wire on the circuit. If these circuits are protect by a 15 am breaker then he is OK. If they are pro...
Cut out that section of pipe and install a proper connection using fernco couplers.
They should not left like that. If there is enough slack to move them an inch then staple them to the rafter beside the plate so they won't be touc...