The sum of all breakers often excede the the value of the main breaker. That is not valid reason for upgrading. You need to do a proper load calcul...
Cut the tape. Don't stretch it to break it. It will always shrink back when you stretch it and the stretched part won't stick.
You didn't say what size your main breaker is. I would say you probably need to upgrade your service to a larger size.
1. replace the first outlet in the chain with a gfci and install the little stickers 'gfci protected no ground'. You can not ground to water pipe. ...
If you don't score 100% on that test you not be allowed to plug in a lamp.
I would imagine that you could do it with the same equipment as a terrazo floor finisher would use.
As long as you bury the junction box inside a wall, you can extend the wires. The junction box must accessable.
You are correct. Connect the in and out black with a pigtail to the switch. Connect all the whites together. Connect the black from the light to th...
You can change them to 20 amp devices but it is not required. 15 amp receptacles are fine aon a 20 amp circuit.
Pull the liner and fill it in with what ever dirt you can get cheap or free. If the wall are a problem just cut enough off the top to be able to co...
Go to google.com and do a search for 'bird house plans' or 'bird feeder plans'. There are a lot of them out there.
I don't know how large this is. I would consider putting up plywood first then applying the bead board. You can apply the bead borad in any directi...
If the outlet was previously 1/2 switched then you need to change the outlet. The tab on the gold(hot) should have been removed. It needs to be the...
It depends on how the removal of the thickness of lathe will affect the thickness of the new wall. If leaving the lathe and installing drywall make...
If the breaker is 15 amp is not a problem. Just make sure someone doesn't change it to 20 amp because they think the whole circuit is 12 guage.