Ceiling Texture
It partly depends upon the look you want. I like a smooth wall, so I would recommend putting a little extra effort into creating a smooth surface ...
It partly depends upon the look you want. I like a smooth wall, so I would recommend putting a little extra effort into creating a smooth surface ...
1
answers708
ViewsYou will need to take the measurements and a sample tile to a local tile store. There is no standard "pepto bismol" tile size or shape out there, ...
5
answers595
ViewsIn short, you should not dismiss it out of hand because mold is not toxic except in very rare, extreme cases. It can be treated and removed even i...
3
answers112
ViewsThere is no "industry standard" answer as far as I know--you can do whatever you want, depending on how much space you have: if it is a tighter spa...
2
answers173
ViewsJay's suggestions are what I would do. With care, it can work well.Also, if you do "patch" the missing floor spot with similar new wood or with wo...
2
answers709
ViewsUsing a masonry bit, drill pilot holes at the location for screw-fasteners. Then insert masonry anchors into those hole and screw the screws down ...
2
answers103
ViewsThere are too many reasons to guess at it over the Internet. However, the two most likely causes are 1) the house is shifting more than anticipate...
1
answers509
ViewsPlain bleach or special grout cleaners. If it is a bathroom floor with soap scum, then CLR or other soap scum remover is good.
6
answers298
ViewsGrab a corner really tight, and PULL.There is no science to it. Just rip and roll it up. You might also want to make a long cut through the middl...
3
answers681
ViewsAdding more layers of polyurethane will not prevent the scratches from showing up in the finish. Whether or not they show up depends simply on the...
3
answers510
ViewsThe Drylock label expressly warns that it is not for use as a floor paint, even if the paint will be covered. Floor paint needs special adhesion a...
1
answers81
ViewsFirst, you should make sure they are strong enough to be suspended from the top. They need not be specifically be "designed" to do so, but they ne...
4
answers928
ViewsYou either use "masonry anchors" or hang them with a long, thin wire from the nearest wood up above. With masonry anchors, you drill a hole with a...
2
answers227
ViewsYou really do not need the plywood subfloor. You can lay carpet and apdding directly onto concrete. You would need to shoot the carpet-tack strip...
1
answers559
ViewsNo, it is not normal to be able to tell when you are standing on a joist or between joists, ESPECIALLY in a new construction house. ACD is also co...
6
answers397
ViewsIt is generally a judgment call based upon the condition of the flooring. You can attach the backer-board to the hardwood flooring, but if the flo...
1
answers645
ViewsYou can paint anything you want to paint; the question is whether it will last. The answer depends upon the surface of your countertops, but, gene...
3
answers250
ViewsI'm not laughing (or I'm at least trying not to :-), but if you do not know what a joist is and are "new to the world of do-it-yourself," then perh...
1
answers210
ViewsI agree that using 1/4 inch drywall should suffice and be more efficient. It is not as if there is not already a wall surface there. 1/4 inch is ...
5
answers688
ViewsThis is more of a plumbing question. Paint should not clog up drains, especially if flushed with water so that it is diluted and does not dry. Yo...
1
answers888
Views