There are many problems that lead to banging pipes. Just Google "banging pipes" to see the possibilities. I would attend a condo meeting & have t...
LollygaggerMember since 07/01/05
dino, no offence intended, but you sound like you have not yet reached the novice stage re DIY plumbing. You can do more harm than good if you mak...
Rotorooter or a competitor is the next step towards solving the problem. make sure they use the largest cutter possible.
As you may have surmised by now, there is no best way, nor worst way. There is no way Shrinkage is common, & a good wallpaper job (IMHO) entails ...
While not impossible, removing wall paint is labor intensive, & just not done. You really only have three options. 1) remove the drywall & repla...
I would make the deck boards radiate from the tub. Like this: http://i10.photobucket.com/albums/a117/Les_Digits/hottubdeck.jpg You could make a...
I think that you would be best off if all the paper were removed. A tool called a "Paper Tiger" is needed. it pricks tiny holes & allows water ...
a horizontal 1 X 6 will cup & split when exposed to weather. consider a non-wood product instead. how it is flashed is dependant upon the siding m...
the top is factory made in a machine that creates curved edges & contours. The backsplash is formed integral with the top.
The new door needs to be a fire rated door. The door & frame will have to be replaced. It is a one man job, but not easily done by a novice. th...
how about this lock? http://doityourself.com/store/6547020.htm the barrel would screw onto the jamb, & the plate onto the face of the door....
I have seen black sand available as a sandblasting medium. You might mix it with Titebond II wood glue & fill the voids with it. Black mortar col...
Your experience is not atypical of Minwax. You will need to wash off the stain & change brands whatever you used. Lacquer thinner will probably be...
Because postformed tops seldom delaminate, I assume that yours is laid-up on site, & has square edges. You might cut away the loose laminate & use...
The term "piano finish" has traditionally been used to describe the highest standards in wood finishing. A novice simply cannot achieve such high ...
Not to sound totally condescending, but making a rabbeted box is pretty basic. http://www.americanfurnituredsgn.com/Rabbet%20&%20Dadoe%20Joints.ht...