Bearing wall!!!!!
Hi, thanks for your concern, but we just took out the drywall, we have not touched the support at all, we did call a pro and should come out and lo...
Hi, thanks for your concern, but we just took out the drywall, we have not touched the support at all, we did call a pro and should come out and lo...
4
answers9
ViewsWould that be safe on wood? Do you have a brand name?Thanks!!
5
answers358
Viewsthey are actually in pretty good condition. they are just very dirty. If I use a buffer will the dirt lift? Are there any strong but safe produc...
5
answers163
ViewsWe just purchase a 100+ year old home. It has beautiful hardwood floors, but has had carpet over it for who knows how long. They are very very di...
5
answers365
ViewsOur pump is in the basement, so I can work on it directly. Basically, theres a nut on top of the pump, you pull of the nut and fill it with water...
4
answers712
ViewsThanks allot for the advise. I already called an electrician and looking at doing it this weekend. Thank you
7
answers876
ViewsWe figured out that we needed to prime the pump. Which we had no idea that we had to do. Also theres a gasket loose on the hose going into the pum...
4
answers249
ViewsHow about just adding a new pipe for grey water to an unknown location outside your home. They did it in the old days. Otherwise, I have no clue ...
2
answers28
ViewsHow can change my homes amperage from 100 to 200?
7
answers1012
ViewsHi, we just purchased a 100+ year old home and we started to break down some of the walls to make rooms bigger. My concern is.... could there be a...
0
answers213
Viewsoops[This message has been edited by Marnie (edited April 21, 2003).][This message has been edited by Marnie (edited April 21, 2003).]
3
answers586
ViewsWe just purchased a house that has been winterized. We tried to turn on the water today and no luck. The house is 100+ years old, water source is...
4
answers712
ViewsWe found some mold in the basement. The moister problem has been fixed, but can someone tell me what is the best product to use to clean the mold ...
4
answers505
ViewsWe just purchased a 100+ year old house. We started to take down one of the walls and found that it is a bearing wall. How do we go about complet...
4
answers242
Views4
answers277
ViewsTHANKS!!!
4
answers405
Viewsyes I guess that's what I mean, I'm just a little worried because this is the first house we buy.... what goes on during escrow, why does it take ...
4
answers991
ViewsWe are purchasing a home and we were wondering... what makes a home fall out of escrow? We need to give notice where we are now and are a little s...
4
answers602
ViewsIs it really that simple? There is no danger with the anti-freeze? Thanks so much for your reply
4
answers902
Views