metal door
Try sanding the high spots with fine sandpaper and recoat.
Try sanding the high spots with fine sandpaper and recoat.
1
answers963
ViewsAnytime you have opposing temperatures at work,there is a chance of a condensation problem.You may recall when superdomes were first constructed,en...
4
answers78
ViewsRegarding the sleeve size...If the new unit is larger,it won't go into the sleeve.I'm not sure how to deal with a smaller unit and larger sleeve.A ...
2
answers124
ViewsI wouldn't invite everyone over at once.It would be appropriate to mention to each contractor that you are receiving estimates.It is possible to sc...
2
answers494
ViewsI think your first idea was much better.
1
answers423
ViewsThere is a common misconception that a tankless heater cannot keep up with a high demand of hot water.These (and other heaters) are sized by estima...
5
answers374
ViewsAlot will depend on if the wood is heavily soiled or just dull from lack of polish.If you need to remove soil I would suggest a product such as Mur...
1
answers345
ViewsThe drain line could be partially blocked or you could have a malfunctioning valve which is suppose to open and allow the water to drain.If you hav...
2
answers6
ViewsI'd stay with copper but protect it from rubbing against anything as it did in the past.My first experience with compression fittings was also a di...
1
answers543
ViewsIn addition to my last post,you have a second angle to cut so that the landing piece connects to the stair piece coming up at an angle.These double...
4
answers623
ViewsRemove the base and lay the new carpet.Then replace the base.Since there may be a place or two where the carpet is just short of the wall,the base ...
4
answers295
ViewsSounds like an outside corner.Both pieces of wainscoat come together by cutting 45 degree angles at the corner.Using a few pieces of scrap as a sam...
4
answers677
ViewsIn a registered historic landmark I think that anything you do needs to be approved.If you are speaking of an old house that isn't a registered lan...
1
answers582
ViewsAlign can have several meanings here so I am not sure which way you mean,but I'll take a shot at it anyway.If the wainscoat is not meeting in the c...
4
answers564
ViewsMake sure it's not your problem before you call public works.Either check your water meter when you feel no water should be running,or shut-off the...
8
answers981
ViewsDo you have well water or city?If water is not running in the house when you hear the noise,then you may be picking up noise from a problem in the ...
8
answers307
ViewsOne way is to get a basic carpentry book as they will also give hints and explain techniques.The easy way out is to find a bench you like at a home...
1
answers583
ViewsYou really need to work with the electrician on this.Alot depends on how busy they are vs. when you need it done.I don't know that you'll do any be...
2
answers943
ViewsHmmm,I pictured this differently but it sounds like you have a handle on it.Just out of curiosity,did you consider tapping off the cold water line ...
5
answers920
ViewsCarpenter bees are really doing damage this year according to a recent newspaper article.Because my house has a history of being invaded I asked an...
1
answers654
Views