Design Delima
I would put the dresser in front of the french doors as long as the glass doesn't show from the sides. A free standing mirror would look really in...
COMMUNITY FORUM
Recent Posts
about 10 years by Melanie
1
answers771
Views
standard size fridge that takes panels?
I want to have the built in look for my fridge, but I am not so big on the shallow depth models. If I build my countertop a few inches deeper, is ...
about 10 years by rpxlpx
2
answers846
Views
original plans in books?
Is there a book or resource where I could evaluate federal and georgian farmhouses in measured drawings? I want to build a farmhouse to blend with...
about 10 years by Piffin
1
answers236
Views
per sq ft costs
I have been quoted anything from 60-130 per sq foot for rural Pennsylvania. Any info. is a help. Not looking at anything high end or even much ov...
about 10 years by Piffin
3
answers466
Views
Norco windows??
This info seems to be the most "real world" and you guys are really running with the ball. Actually, I worked for a company that installed Norco i...
over 10 years by Melanie
8
answers958
Views
top fridge bottom freezer, advice??
I mean the reverse arrangement of the standard fridge, with the freezer below the fridge. They come with a door or a pull out and I don't know whi...
over 10 years by Melanie
5
answers217
Views
any advice about BlueMaxx or Armaxx?
considering using the system for the whole house, anyone have it? like it? cost worth it? any hot points to watch?
over 10 years by Melanie
0
answers834
Views
down draft gas range or hood?
Is it possible to have a down draft gas range or only a hood. I have never lived in a place with an effective ventalating system for the range. S...
over 10 years by LDoyle
2
answers423
Views
top fridge bottom freezer, advice??
I like the top fridge design, but am not sure whether to get the chest freezer or the door type. Does anyone have one and advice? Dan? (do you se...
over 10 years by rpxlpx
5
answers739
Views
Drop-In Range
Why are you all getting rid of the drop-ins?I think they look more fitted and cleaner and that the counter can fit under a lip or at least be a clo...
over 10 years by Melanie
14
answers731
Views
dimensional lumber as flooring
Is it possible to use poplar or pine in random widths as flooring for my house? I see pine in Lone Star steakhouses and it looks pretty grungy. S...
over 10 years by Piffin
1
answers366
Views
woodstove flue and oil burner chimney, can they be the same chimney?
I am considering an oil furnace, and I also would like to have a woodstove. Can one chimney be used for both?
0
answers395
Views
new construction propane hot water baseboard??
Is the cost of propane worth using to avoid the expense of a chimney for an oil fired system? Also, is it dangerous to use propane considering the...
0
answers613
Views
Norco windows??
I like Norco windows because of the 7/8" grill width and the profile of the grill. Is this a laim criteria for picking a window? Is there another...
over 10 years by Melanie
8
answers838
Views
?load bearing walls must be less than 16'??
I designed a plan with 18' spans and took it to a potential builder. He told me not to exceed 16' or there would be a huge cost increase. Is this...
about 10 years by Piffin
5
answers404
Views
BlueMaxx
I am considering using BlueMaxx for a residence. Is it really expensive compared to 2x6 with vinyl siding? Are there advantages or disadvantages ...
over 10 years by GlennG
1
answers548
Views
