Retisin.........I agree completely! Anna sent me an e-mail and explained that her marble fire place doesn't look good with the new mantle they jus...
MrPaintMember since 02/03/03
I would paint it before - then touch it up after installing it.Mr. Paint
Swedish oil is the same thing - also Tung oil...Danish oil........different names for the same thing..You should be able to find this at a The Home...
Yes.......Treat it just like masonry......my question would be though...WHY on earth would you want to paint marble?Mr. Paint
Disagree JApply only ONE coat of a good sealer (Glidden Ultra-Hide Gripper comes to mind) - Two coats of primer is a waste of time and primer.Apply...
You are likely thinking of Duration? It has a lifetime guarantee????You also might be referring to an elastomeric? Most paint companies have simi...
John.......stucco without the wire will fall off. You could scrape it all off - reprime and repaint - lots of work though.Elastomerics were not des...
I disagree. Painting Elasto on wood is a mistake. You will have a failure there.Plywood cracks because:1. It is multiple layers of wood that exp...
Use a good hiding primer like Glidden Ultra-Hide Gripper - and two coats of a Glidden Evermore product - say an eggshell or a satin - you should be...
All right J.....I see you are back on the site. I take a few days off - and you pop back up.I have a bone to pickFirst of all - she has plenty of ...
Tough call... I am thinking that if your clear is just peeling slightly - rough it up gently and recoat it.I would just rub it with my hand first ...
If you give your electric utility a call - they will come out and put a shield over your lines that runs about 3 feet out from the house.This shoul...
Hey.........that's a thought too - water based goof off!Worth a shot!Mr. Paint
You are perfectly correct. Use B-I-N - it is a great shellac. Only apply this over the knots - not the whole surface - B-I-N is not designed to b...
You really should prime the walls after you patch - that will eliminate the "flashing" spot where you may not have sanded.I would not add food colo...