Our house is about 5 years old and our heat and air is delivered through the overhead vents. In the den, we have two overhead vents. How hard woul...
I have T111 siding on my house and it needs to be stained again. It has been about 6 years and all of the protection is gone. I would like to pai...
I have a 10 by 20 metal building which is bolted down to the concrete slab by the metal frame. When it rains, water enters at the front left and r...
Have just completed the wiring for my 10 by 20 metal building. What would be the best insulation for this type of structure without alot of expense?
Recently I had a metal building poured on a 4 inch concrete slab 20 x30 foot. The rear of the building had to be built up about 15 inches. Now th...
We just purchased a house which is about 3 years old. It has a disposal built in which is very nice. The home is also on a septic tank system not...
I have a new 20 by 30 foot metal building which I plan to use as a small shop. Since the frames are metal, what would be the best location for the...
I am in the process of pouring a 21 by 31 foot slab 4 in. thick, to install an aluminum carport type structure with the last 10 by 20 foot partitio...
Our home is covered on the exterior, with T111 siding when it was built back about 20 years ago. I have to restain about every 5 years. It is pas...