I'm assuming your deck will be some kind of planking be it 5/4, 2x4 or 6, if it is you don't really need to slope it at all.
Yes, since all your pipes are (or should be) grounded, you have a problem somewhere in your house, doesn't have to be the disposal, could be anythi...
Absolutely agree electricman. Thanks Paul, I didn't think of BX cable, but you're right that is one way a 2 wire box could be grounded.
If this guy's got an old 2 wire system, how would any of his junction boxes or outlet boxes be grounded??
It's relatively easy to replace the plugs. Make sure you turn off the electricity to the plug in question. You will only have 2 wires to the plug...
When paint is intially applied and beginning its drying cycle it will briefly go thru a "plastic" stage where if you go back over it, it will peel ...
That's a bunch of BS, I can understand leaving char marks on studs and joists, but not on pvc pipe. If he had to solder where he did, he was just ...
Buy or borrow an electronic stud finder. Studs are mostly 16" on center. New construction electrical outlets are almost always attached right to ...
Yes, I always put a chipper adjacent to a gullet and stagger my chippers so no 2 cutters on the chippers are adjacent to one another, and I never c...
I've got a Craftsman 7" stacked dado set, whenever I cut dados the bottom channel is not clean, I generally have 2 channels where the 2 outer blade...
Something is choking your flow, when you plunge does that help flow or not? I have also seen things stuck in toilets where they are small enough a...
Current is "leaking", something isn't wired properly, or you have some device which is defective. Although the problem can be on that particular c...
Those are all brand name top notch saws. For a serious table saw plan on spending at least $500. I have a craftsman I pd $500 15 yrs ago and I st...
If you want a 1/2 bath there are such things as "upflush" toilets, and you could tap in your sink plumbing into the main soil stack and your home f...
It all depends what you're going to be putting up there. I can only assume it will be incidental things that don't weigh a hell of alot. In that ...
You have a partial obstruction, sometimes it's human waste and flushing several times will get rid of it. Something may have dropped in your toile...
I have a craftsman shaper I bought svrl yrs ago, works fine, however does anyone know of any adapters which would allow me to use router bits on it...
You say you have other bathrooms working fine, does that include the toilets in those other Bathrooms? There should only be 1 waste line running f...