Nails,...nails.....nails,....think nails !! From the vapor barrier, trim stock, J chanel, and shims, used to anchor the siding you will have n...
OddBallMember since 11/10/06
I`ve installed plenty and different sizes or models. I can tell you that the Velux brand is the most durrable and user friendly to install. Maybe n...
Lead,...10" roll,...5 up the wall ...5 on the roof. You`ll be able to roll it smooth on a flat wall and or conform it to most any shape of meatl ro...
Roofing,...Not reccomended. Siding,....Forget it !! Carpentry,....plauseable. Framing or decking or sheething,....Priceless !!
Don`t put any asphalt shingles on any flat roof reguardless of what is already exsisting. Four nails per shingle will allow water to drain dow...
It`ll kill your home,and you`ll hardly eva see it comming !! If you live in snow country,...It is essential to protect (with ice and water bar...
Although you fail to mention what kind of metal, You`ll find choices of metal and sold strips from coils at Home Depot !!
This is my third attempt for this site to recognize that I AM LOGGED IN and better finally post my reply !! It sounds like Modified Bituman, a...
Torch down rubber,..????? !! Can you supply a photo ? Putting the wrong coating on the wrong product can lead to product failure. There a...
If I may, Reguardless of why, your venting is not properly installed. Iv`e done hundreds of these repairs, the outside route is the way to go....
Your leak is do to the first row in front of the vent not sitting under the vent. You are creating a cavity to accumulate rain, snow, fog, or even...
The roof tar has a vent sticking up out of it !!...........definate source of a leak too !! Let`s flash that tar with a vent, first,...yes,.....
......Cracking is useually do to temperature changes, or framming movement. Allagating is after a roofs hybernation phase has passed, the roof wil...
Have you tried to isolate the leak with a garden hose ,starting from the bottom working up in incraments. You should be able to do this rather quic...
Yor roof should never be flat,or level !! If your roof drains to center drains.....No ....Never !! If your roof drains to the edges....Yes...
Are your gutters wood or aluminum ? Does your eves have dripedge or not ? Was there a row or two of ice and water barrier applied under the roofi...
Don`t do it !! The pressure greater than useing a pushbroom or scrubbing brush,and rinsing with a garden hose, will take the pulp out of the wood ...
The turbines only work with wind and replace more air when spinning. The ridgevent works better with wind but works without also. If view...
Your ridge vent is the exsaust and soffit and or sheething can be the intake. for the soffit side, use the ..prop-vents method in conjuntion ...
Your probably describing three tab shingles that look like bricks, and architectural laminated. If so ,.....the three tab has expantion joint...