Dryer trips Breaker.
sounds like the top 30 is mated with the first 50, and the bottom 30 is mated with the second 50. as far as i know, you cant buy this configuration...
COMMUNITY FORUM
old_timer
Member since 07/30/02Recent Posts
over 10 years by old_timer
5
answers506
Views
is 100 amps enough?
are you saying that the former tenants ran all that equipment from the house service panel?....if so, then i imagine there was/is some definite "li...
over 10 years by old_timer
1
answers253
Views
200 Amp Service
are the breakers installed all on the same side of the 100 amp. panel?..if so, the problem may be an unbalanced load in the panel. and, yes, it pr...
over 10 years by old_timer
1
answers528
Views
Run Electrical Wire
for direct burial applications involving a 20 amp. circuit, use a 12/2 with ground "uf" type, buried 24' deep, and protected by a 20 amp. breaker
almost 11 years by old_timer
3
answers535
Views
Define a Qualified Person
as an electrical contractor with 38 years in the trade, i have seen quite a bit of bad wiring, device mis-applications, and downright dangerous sho...
almost 11 years by old_timer
7
answers68
Views
