We used to have mice,but we got a good mosing cat from a farm got it fixed so it didn't go in heat and now we have no more mice and we fell in love...
Sounds like it isn't spinning fast enough,got to much line in the head? head is going to slow to cut.Is it running correctly?if it isn't hitting hi...
I guess I am totally lost as to who was the buyer and seller,and why the hell do we care.Post this on ebays board not here.
I have heard of people using a razor knife and cutting right on the line of the border all the way around the bottom of border right where it meets...
Just what my roofer said was I had wavy or lumpy spots too,so I had another roofer come out and he said that it is a new roof and will lay down in ...
I would patch or spackle the bad spots sand smooth fixed areas.Then lightly sand the whole thing prime then paint.
You say you have another house (guest house),live in that for awhile 3 days tops and get the same product because you cannot just apply a poly or a...
Thats what I have always thought orange peel look has always been done,till #5mentioned the other way but now that I really think about it the spla...
Sounds like you are really fed up and maybe to get this done without anymore frustration is to call someone to take care of it for you?Just a sugge...
Did not know these are textured doors then it would be ok,to brush if they were flat,roller and brush marks would make these look like garbage.
Are CLOPLAY gargae doors metal?If so if they come pre-primed from factory the best way is to use just 100% acrlyic paint and spray it on.Do not app...
A solid stain is much like a paint,you need to pressure wash off the gray as best as possible,should just come right off probably without adding an...
I like to lightly sand before applying anything just for the fact it gets rid of any small imperfections or mars that may be on it.Seeing as how no...
Have you looked into renting some scaffolding,they make some very 1 person user friendly sections,or can you get an electric man-lift in their?
I am a hothead when it comes to this kind of stuff so maybe I owe you an apology on this and sounds good to me to drop this one.
5 you are a sales rep,what hands on do you have besides schooling and what you have been taught,how many houses do you paint a year?That is the mos...
Maybe ive done this accidently before not masking off the rubber seal when in finishing new windows and have put sealer on them and then the clear ...
That is rare in MN where I live,usually moisture has to cause this such as sprinkler systems,no gutters above this area,what #5 said works also Ben...
I wouldn't do any of this without the landlords ok 1st.Weather you bothering them or not 1 it is not your house (sorry)but could save you headaches...