paint
I always like to paint the ceiling first--much easier to cut the walls as opposed to the other way.. neil munro Munro Products
COMMUNITY FORUM
revere22
Member since 04/21/07Recent Posts
over 4 years by revere22
3
answers294
Views
paint formica
mineral spirits will not hurt formica. I would first sand with a fine sandpaper (320 and up) then wipe down... A good stain blocker primer is also ...
over 4 years by revere22
2
answers914
Views
paint shelf
yes you can use oil and poly.. make sure each step dry....Also i would use spray poly. Neil Munro Munro Products
over 4 years by revere22
2
answers782
Views
brass
There are good spray paints out there that give a hammered look or antique look. I would say to prep- wet sand the brass with 220 grit wet/dry pape...
about 6 years by revere22
1
answers114
Views
metal shed
I painted my metal shed four years ago and so far so good. (Buf, NY all sorts of weather going on!) I started by washing it w/ soap and water and l...
about 6 years by revere22
1
answers231
Views
