This reply is long after the post, but maybe will help. First of all, you can get temperature-sensitive vents that don't require electricity. (I ...
Hollywood, please tell Fast how to do that -- "make sure the condensor coil is not plugged". (I'd like to know too.) Is it something an amateur w...
The liner will certainly kill grass or weeds, but any irregularity under the liner or any particularly hard spots at all will make the liner more s...
If you can wait several months, they will become dry and brittle and lose much of their tenacity. Then they can be brushed off with a broom or brush.
If the panes of glass are flat, a single-edge razor blade will work well. That way you don't have to worry about getting paint remover or other ch...
It's difficult to interpret "funny noise", but first guesses are the fan or the compressor. If it is the compressor, then it's probably not worth ...
If I'm reading you correctly, there's really only one part left that could be the culprit. That's the shutoff valve - the thing that shuts off the...
They have a Web site at: www.trex.com also see extrudawood at: www.extrudawoodoutdoor.com/
By "knock down" I assume you mean remove the old popcorn stuff in order to spray on new?I watched a professional spray LIGHTLY with water while scr...
They have a Web site at: http://www.extrudawoodoutdoor.com/ It looks good on the display screen. Haven't seen it in person.
Much depends on your location and soil type. I have 4x4 posts on my deck that are thoroughly rotten on the INSIDE after 14 years. (This is near Ra...
OOPS, I think I made a mistake when I said green and yellow are for the 2nd line. My memory is fuzzy on which 2 wires are paired. Either way, conne...
If there is a jack on an adjoining wall (I know you said adjoining ROOM), you can simply cut or drill a hole directly behind the current jack into ...
If I understand your description, one of 2 things is true: either the door is warped or the wall to which the door unit is attached is not straigh...
Sounds like it might be easier to replace the wood than to fix it. You could prepare the replacement pieces from kiln dried wood, prime and paint ...
If the wood is not very hard, then power washing can do damage. You didn't say what kind of wood or what condition it is in.
1) I haven't seen a double switch for 1 box, but if it's available, I'd say use it. If you can't find one, you'll have to add a switch. You can e...
I believe you have to be licensed to purchase the freon. You should verify this before going any further with your plan.
A custom-made combination would be very expensive. I'd say look for a set in which the side unit is too large and can be cut down a bit. The only...