table saw
Well I did a little research and ran into a dead end on the ***** web site. They just say Motor unavailable (P/N 62618). I have had two ***** 10" t...
Well I did a little research and ran into a dead end on the ***** web site. They just say Motor unavailable (P/N 62618). I have had two ***** 10" t...
14
answers252
ViewsI am not a licensed electrician but work with many that are. I don't believe that you can run flex conduit to the new panel, but you will wan to ch...
4
answers991
ViewsI just got through removing popcorn ceiling in one large room in my home. I purchased some heavy plastic sheeting (4mil)to cover the entire floor a...
4
answers248
ViewsI recently purchased and moved into a new home, well it was new 30 years ago. I recently was up in the attic arunning some surrond sound speaker le...
1
answers108
Views3
answers385
ViewsI have a shower that has a tile floor and walls. The tiling on both the floor and walls seems to be ok except for cracking of the grout in the corn...
3
answers424
ViewsI have worked in the communications field for many years and have installed numerous types of radio transmitting equip. The Sat dishs used for upli...
4
answers90
Viewsdon't crush the cat5 cable with the clamps! It's not a power lead.
2
answers549
ViewsI've used a number of different ones 12V 14V etc but I wouldn't trade my old Makita 9V for anything. Yes I know it doesn't have the power or batter...
15
answers428
ViewsI have the floor model 6 1/8 Craftsman unit and had the same problem to begin with. What I discovered on mine was that the out feed table was not ...
2
answers48
Views3M makes a wheel for grinders that is specifically designed for aluminum. I kind of resembles a large brillo pad in its texture. If you would like ...
3
answers702
ViewsI am planning on installaing tile flooring in our kitchen/eating area. The subfloor is concrete, about 35 years old, there are no creacks and is ve...
0
answers197
Views