i was wandering if someone could tell me how to draw a true arch. i can do half circles and radius'.i do a lot of framing and run into this often.a...
by code you cant have any rise above 8 inches and no less than 9 inces on your tread.you could cut stringers out of 2by 12's but they would be ver...
the angled nail slots make it easier to toenail the nails through the hanger and the joist.instead of nailing straight threw to the other side of t...
in stepping out irregular hips/valleys ,would you step out the pitch that lies in the middle of your two pitches.Or would it be just as true to pul...
there is nothing you can use to join the joist without some sort of support.cantelever or post.
build a cricket behinb your chiney to keep water from standing behind your chimney.a cricket is a roof that deflects water to either side of your c...
It depends on the span your beam would have to cover.If the span isn,t over 9 feet you might be able to triple a 2x12.how ever if the span is over ...
I would like to know how to step out hips and valleys with a framing square.Iknow how to step out common rafters and figure jack rafters,but not hi...