Your very welcome Here in case you want to know how much money your losing (NOT counting fuel if it is hot water) http://www.awwa.org/ad...
SylvanMember since 01/24/06
What project are you working on now?
Started doing new constuction again,. 50 family homes for middle income
What is your favorite tool?
Sewer and drain cleaning equpment
To be totally honest with you once someone uses any chemicals in a drain / sewer I charge an extra $100 as I already had one employee lose an eye...
Call the land lord saying you just moved in and there is something wrong with the waste Then if the plumber he calls pulls back what you placed...
Actually you cannot live with a drip 1- If your water is metered your going to pay a small fortune over time for wasted water 2- If this is h...
Normally I try not to use a plunger as why push the obstruction further down stream instead use a closet auger (General makes a decent one) and you...
Hole on the bottom of a sink? one hole is normally the outlet The holes near the top are for overflow and is the drain is blocked or sluggish th...
about how much should it cost to have someone come & take the disposal off to find the bracelet & replace it? How much does it cost to get a fil...
Probably never as metal (gold) will get caught in the grinder and there possibly will remain parts stuck in these cutters. Besides gold being a ...
Ok you want a quick way out that should last about a year (depending on usage)?? Call a plumber to WATER JET these lines as water jetting will...
If a bowl loses it seal (water) it normally means either a possible blockage Or oscillation (wind effect) Or negative or positive pressure ...
There is a place called "home wreckers" that specializes in salvaging old fixtures and other parts from homes they do alterations or know down T...
1- Get rid of the lousy PVC 2- Increase the kitchen sink waste line to 2" diameter ( I never use less then 2") 3- Use long radius fittings ...
Remove the shower head holding back on the shower arm with another wrench. Then check the flow restrict or for possible obstructions. While t...
Try using a hack saw blade GENTLY cut the nut in half Use duct tape on one end to act as a handle TA DUMM
Please keep me posted, I hope you did clean the area and rought it up a little so the epoxy will hold better