demolish asphalt
Taking out asphalt is not a very technical job, just a lot of work. Most can be broken up using a sledge hammer, or you could rent an electric pow...
Taking out asphalt is not a very technical job, just a lot of work. Most can be broken up using a sledge hammer, or you could rent an electric pow...
1
answers104
ViewsI am stumped on this one, but had a thought from your post. You say: **The drain vent is over the bathroom and there is none above the kitchen sin...
9
answers830
ViewsMost are compression fit with tabs that fit inside the chimney flue, or that tighten over the outside of the flue extension. You only want it tigh...
1
answers988
ViewsThe belt sander would level out splinters and hold up to most nails. You could sink nails as you go to keep the heads from being sanded off. It wo...
10
answers676
ViewsIt sounds like the deck was never protected with a product to prevent wood deterioration. Painting the deck surface is a high maintenance proposit...
10
answers517
ViewsThere are too many variables here that are specific to your local market to predict the value added for a carport. For maximum return, be sure to ...
4
answers394
ViewsTough question. You offer 3 maintenance items and one addition as possible value builders for your home. The addition of a garage is the only ite...
4
answers500
ViewsK2, thanks for all your efforts in the forums. Regarding polyurethane flammability, I don't think it will contribute to flame spread or ignition i...
2
answers766
ViewsIf the attic does not need to provide a storage function, your best best option is to add unfaced insulation, perpendicular to the existing. You c...
1
answers343
ViewsThe cracks you describe are in fact called alligatoring. It is a serious adhesion problem that will require sanding or stripping. Most of the tim...
6
answers330
ViewsPlaster is highly valued by people who want to keep an older structure true and original. A 1916 home probably not only needs insulated, but needs...
2
answers451
ViewsYou are considering buying a house. Unless the current owner allows you to remove carpet and vinyl flooring to inspect the condition of the wood f...
1
answers489
ViewsThe comment about the direction of your vapor barrier (facing crawlspace) caught my attention. For every rule there is an exception, and you live ...
1
answers589
ViewsI think everything is pretty good with your plan and construction methods with one exception. The polyethylene film is a good vapor barrier, and n...
1
answers838
ViewsWhere the roof meets a vertical wall, step flashing is required to be installed. The flashing slips under the siding and between layers of roofing...
3
answers910
ViewsObviously, the contractor does not want to end up on the short end on this transaction by underbidding the work, and the insurance wants to limit i...
4
answers623
ViewsI have done this with overhangs up to 4-feet with no pillar support. I built a triangular frames from 2x6 lumber incorporating the roof slope I wa...
1
answers856
ViewsLuan is not a structural board, but is made with a very smooth finished face that will work well under vinyl tile. The alternative would be A-C pl...
15
answers111
ViewsThe only laminate I know of that is rated for water exposure is Mannington ICore. You can do an on line search to check out the specifications. Fo...
4
answers581
Views