wall plates
You have two ways to approach this wall plate business. You could buy a simple wall plate blank or one with a coax connector and attach it to the ...
You have two ways to approach this wall plate business. You could buy a simple wall plate blank or one with a coax connector and attach it to the ...
1
answers923
ViewsTry spelling Butyl and do an internet search. Unless you have a moisture issue from under a slab, this should not be necessary. A quality tile an...
2
answers718
ViewsAny clearance requirements are specified on the installation instructions that came with the stove. In most cases, zero clearance is fine, as long...
2
answers805
ViewsThe test for asbestos is simple and inexpensive. Simply take a piece of the material or core with the full depth. Deliver it to a local analytical...
4
answers812
ViewsJust to cover the simple things first, check the strainers at the faucet outlets and shower heads. Replacement of the heater may have dislodged se...
2
answers11
ViewsWhen adding to a circuit, match the existing wiring. Most commonly, for a 15 amp service 14/2, for 20 amp 12/2. There is no harm in using 12/2 wi...
1
answers848
ViewsYou have received good advice from the other posters. I wanted to comment on your question whether you should add something to the water to prevent...
7
answers298
ViewsCrawl spaces may be insulated in one of two common ways. The most energy efficient is to insulate the floor of the heated structure above and allo...
1
answers195
ViewsI complained too, but got over it. The faucets are expensive, but just about the best built with solid brass bodies. Never a problem. Ours had a...
2
answers849
ViewsYou are going to need a foundation plan and framing and possibly electrical and HVAC plans. I can help, but you need to first find out what depth ...
2
answers469
ViewsDemolish the old walls and hang new drywall. Once plaster reaches this degree of degradation, it is no longer repairable. The new walls will be m...
1
answers294
ViewsUse a metal polish to buff the copper to a high shine. Then use an automotive clear lacquer to seal the copper and prevent oxidation. Someday, the...
1
answers632
ViewsThe rotted wood needs to be removed, but can be patched inexpensively with OSB sheets to match the depth of the rest of the siding above. Leaving ...
1
answers425
ViewsThey're not bumblebees, you have carpenter bees. Read about them and solutions at www.bugspray.com.
2
answers773
ViewsPlumber Tom, you need to get out of your current loan, whatever it takes. You indicate you are faced with a negative equity situation which may po...
7
answers272
Views